Bibliography

BIBLIOGRAPHY



REFEREED JOURNAL ARTICLES

Borgard, 1995 Borgard, G.D., S. Molvig, P. Balaram, T.W. Root and J.A. Dumesic, "Microcalorimetric and Infrared Spectroscopic Studies of CO, C2H4, N2O, and O2 on Cu-Y Zeolite", Langmuir, 11, 2065, 1995.

Chen, 1994 Chen, D.T., L. Zhang, Chen Yi, and J.A. Dumesic, "Methylamine Synthesis over Solid Acid Catalysts: Calorimetric and Infrared Spectroscopic Studies of Adsorbed Species", Journal of Catalysis, 146, 257, 1994.

Cortright, 1994a Cortright, R.D. and J.A. Dumesic, "Microcalorimetric, Spectroscopic, and Kinetic Studies of Silica-Supported Pt and Pt/Sn Catalysts for Isobutane Dehydrogenation", Journal of Catalysis, 148, 771, 1994.

Crittenden, 1995a Crittenden, J.C., Y. Zhang, D.W. Hand and E.G. Marchand, "Sun Fuels Groundwater Remediation", Water Environment & Technology, 7, 2, 15, 1995.

Dumesic, 1993 Dumesic, J.A., D.F. Rudd, L.M. Aparicio, J.E. Rekoski and A.A. Trevino, "Methane Partial Oxidation by Li-MgO: The Microkinetics of Heterogeneous Catalysis", American Chemical Society, 1993.

Gonzalez, 1993 Gonzalez, M.R., S.B. Sharma, D.T. Chen, and J.A. Dumesic, 'Thermogravimetric and Microcalorimetric Studies of ZSM-5 Acidity", Catalysis Letters, 18, 183, 1993.

Hand, 1995a Hand, D. W., D. L. Perram, and J. C. Crittenden, "Destruction of DBP Percursors with Catalytic Oxidation", American Water Works Association Journal, Vol. 87, No. 6, 84-96, 1995.

Handy, 1993 Handy, B.E., S.B. Sharma, B.E. Spiewak, and J.A. Dumesic, "A Tian-Calvet Heat-Flux Microcalorimeter for Measurement of Differential Heats of Adsorption", Measurement Science and Technology, 4, 1350, 1993.

Hwang, 1994 Hwang J.Y., X. Huang and A.M. Hein, "Synthesizing Mullite From Beneficiate Fly Ash", JOM, pp 36-39, May 1994.

Mayer, 1994 Mayer, A.S., V.J. Wildfong and R.A. Voigt, "Modeling the Fate of Hazardous Compounds in Conventional Wastewater Treatment within a Waste Minimization Framework", Computer Techniques in Environmental Studies V, I, Computational Mechanics Publications, Southampton, UK, pp. 191--198, 1994.

Mourand, 1995 Mourand, J.T., J.C. Crittenden, D.W. Hand and S. Notthakun, "Regeneration of Spent Adsorbents Using Advanced Oxidation", Water Environment Research , 67 , 355, 1995.

Olson, 1993 Olson, W.W. and J.W. Sutherland, "Research Issues in Demanufacturing", Transactions of the North American Manufacturing Research Institution of SME , 22, pp. 443-450, 1993.

Sharma, 1993 Sharma, S.B., B.L. Meyers, D.T. Chen, J.T. Miller and J.A. Dumesic, "Characterization of Catalyst Acidity by Microcalorimetry and Temperature Programmed Desorption", Applied Catalysis A: General, 102, 253, 1993.

Sharma, 1994a Sharma, S.B., J.T. Miller and J.A. Dumesic, "Microcalorimetric Study of Silica-and Zeolite- Supported Platinum Catalysts", Journal of Catalysis, 148 , 198, 1994.

Sharma, 1994b Sharma, S.B., P Ouraipryvan, H.A. Nair, P. Balaraman, T.W. Root and J.A. Dumesic, "Microcalorimetric, NMR Spectroscopic and Reaction Kinetic Studies of Silica- and L- Zeolite-Supported Platinum Catalysts for n-Hexane Conversion", Journal of Catalysis, 150, 234, 1994.

Shen, 1994a Shen, J., C. Yi, R.D. Cortright and J.A. Dumesic, "Microcalorimetric and Infrared Spectroscopic Studies of g-Al2O3 Modified by Tin Oxide", Catalysis Letters, 26, 247, 1994.

Shen, 1994b Shen, J., C. Yi, R.D. Cortright and J.A. Dumesic, "Microcalorimetric and Infrared Spectroscopic Studies of g-Al2O3 Modified by Basic Metal Oxides", Journal of Physical Chemistry, 98, 8067, 1994.

Spiewak, 1994 Spiewak, B.E., B.E. Handy, S.B. Sharma and J.A. Dumesic, "Microcalorimetric Studies of Ammonia Adsorption on g-Al2O3, HNa-Y Zeolite, and H-Mordenite", Catalysis Letters, 23, 207, 1994.

Vadrevu, 1994a Vadrevu, S., K. Philipps, J.W. Sutherland and W.W. Olson, "Loss Function Modeling of Time Variant Quality Characteristics", Transactions of the North American Manufacturing Research Institution of SME, 22, pp. 343-349, May 1994.

Yaluris, 1994 Yaluris, G., R.J. Madon, D.F. Rudd, and J.A. Dumesic, "Catalytic Cycles and Selectivity of Hydrocarbon Cracking on Y-Zeolite-Based Catalysts", Industrial and Engineering Chemistry Research, 33, 2913, 1994.

Yaluris, 1995a Yaluris, G., J.E. Rekoske, L.M. Aparicio, R.J. Madon, and J.A. Dumesic, "Isobutane Cracking over Y-Zeolites: Part 1. Development of Kinetic Model", Journal of Catalysis, 153, 54, 1995.

Yaluris, 1995b Yaluris, G., J.E. Rekoske, L.M. Aparicio, R.J. Madon, and J.A. Dumesic, "Isobutane Cracking over Y-Zeolites: Part 2. Catalytic Cycles and Reaction Selectivity", Journal of Catalysis, 153, 65, 1995.

ARTICLES SUBMITTED OR IN PRESS

Batzer, 1995 Batzer, S.A., P.D. Rao, W.W. Olson and J.W. Sutherland, "An Experimental Investigation into the Effects of Cutting Conditions on Chip Morphology", submitted for review to 1996 S.Wu Symposium.

Cortright, 1995a Cortright, R.D. and J.A. Dumesic, "Effects of Potassium on Silica-Supported Pt and Pt/Sn Catalysts for Isobutane Dehydrogenation", accepted for publication in Journal of Catalysis, 1995.

Cortright, 1995b Cortright, R.D. and J.A. Dumesic, "L-Zeolite-Supported Pt and Pt/Sn Catalysts for Isobutane Dehydrogenation", accepted for publication in Applied Catalysis A: General, 1995.

Crittenden, 1995b Crittenden, J.C., R.P.S. Suri, D.L. Perram and D.W. Hand, "Decontamination of Water Using Adsorption and Photocatalysis", submitted to Journal of Environmental Engineering, 1995.

Crittenden, 1995c Zhang, Y., J.C. Crittenden and D.W. Hand, and D. L. Perram, "Destruction of Organic Compounds in Water Using Fixed-Bed Photocatalysts", accepted for publication in ASME Journal of Solar Energy Engineering, 1995.

Crittenden, 1995d Crittenden, J.C., Y. Zhang, D. W. Hand, and D. L. Perram, "Solar Detoxification of Fuel-Contaminated Groundwater Using Fixed-Bed Photocatalysts", accepted for publication in Water Environment Research, 1995.

Daniel, 1995 Daniel, C.M., K.V.C Rao, W.W. Olson, J.W. Sutherland, "Analysis of Cutting Fluid Effects on Heat Transfer in Machining", submitted for review to 1996 Japan/USA Symposium, 1995.

Dewey, 1995 Dewey, G.R., J.F. Sandell, L.L. Sutter and J.A. Willemin, "Evaluation of Lead Phases Following Leaching of Municipal Waste Combustor Fly Ash", submitted to the ASCE Journal of Environmental Engineering, July 1995.

Durfee, 1995a Durfee, M.H. and P.P. Radecki, "A Haystack of Needles: Problems and Strategies of Ecosystem Management of Lake Superior", accepted for Sustainable Development, 1995.

Haan, 1995a Haan, D.M., W.W. Olson and J.W. Sutherland, "The Mechanisms of Metal Cutting Fluids in Machining Aluminum Alloys", submitted to AAMA, 1995.

Hand, 1995b Hand, D.W., R.T. Rollman, J.C. Crittenden, D.L. Perram and Y. Zhang, "Destruction of Volatile Organic Compounds Using Air-Phase Photocatalysis", submitted to Journal of Air and Waste Management, 1995.

Hepworth, 1995a Hepworth, M.T. and F.N. Bender, "Recovery of Lime and Sulfur Products from Utility Coal Wastes", submitted to the Journal of Resource Management and Technology, January, 1995.

Hoerning, 1995a Hoerning, J.M., M.A. Evans, D.J. Aerts and K.W. Ragland, "Organic Emissions from Combustion of Pine, Plywood and Particleboard", submitted to the Journal of Fuels, September, 1995.

Hokanson, 1995a Hokanson, D.R., T.N. Rogers, D.W. Hand, F. Gobin, M.D. Miller, J.C. Crittenden and J.E. Finn, "A Physical Property Resource Tool for Water Treatment Unit Operations", submitted to Environmental Science & Technology, 1995.

Kawatra, 1995 Kawatra, S.K. and T.C. Eisele, "Removal of Unburned Carbon from Fly Ash by Froth Flotation", to be presented at the SME 1996 Annual Meeting, 1995.

Kutsovskaya, 1995a Kutsovskaya, M., M.T. Hepworth and J. McGaa, "Recovery of Lime, Sulfur, and Iron via Utilization of Gypsum and Pyrite Wastes", submitted for publication in Industrial and Engineering Chemistry Research (ACS), June, 1995.

Liu, J., 1995a Liu, J.B., J.C. Crittenden, D.W. Hand and D.L. Perram, "Destruction of Chlorinated Hydrocarbon in Water Using Heterogeneous Photocatalytic Oxidation", submitted to Water Research, 1995.

Liu, J., 1995b Liu, J.B., J.C. Crittenden, D.W. Hand and D.L. Perram, "Regeneration of Adsorbents Using Heterogeneous Photocatalytic Oxidation", accepted for publication in Journal of Environmental Engineering, 1995.

Liu, J., 1995c Liu, J.B., J.C. Crittenden, D.W. Hand and D.L. Perram, "Removal and Destruction of Organic Contaminants in Water Using Adsorption, Steam Regeneration, and Photocatalytic Oxidation-Pilot Study", submitted to Journal of AWWA, 1995.

Luehrs, 1995 Luehrs, D.C., J.P. Hickey, P.E. Nilsen, K.A. Godbole and T.N. Rogers, "Linear Solvation Energy Relationship of the Partition Coefficient of Organic Solutes Between Water and Activated Carbon", accepted by Environmental Science & Technology, 1995.

Patty, 1995 Patty, R.M., D.W. Hertz, C.R. Baillod and J.W. Sutherland, "Environmentally Conscious Design for Construction", submitted to ASCE Journal of Construction Engineering and Management, 1995.

Philipps, 1995a Philipps, K.K., W.W. Olson, and J.W. Sutherland, "Shearing of Automotive Grade Polypropylene and Acrylonitrile Butadiene Styrene to Facilitate Recycling", submitted for review to 1996 North American Manufacturing Research Institution of SME, North American Manufacturing Research Institution of SME conference, 1995.

Spiewak, 1995a Spiewak, B.E., R.D. Cortright and J.A. Dumesic, "Thermochemical Characterization of Heterogeneous Catalysts", Handbook of Heterogeneous Catalysis, VCH Verlagsgesellschaft mbH, Weinheim, Germany, 1995.

Spiewak, 1995b Spiewak, B.E., J. Shen and J.A. Dumesic, "Microcalorimetric Studies of CO and H2 Adsorption on Nickel Powders Promoted with Potassium and Cesium", submitted to the Journal of Physical Chemistry, 1995.

Suri, 1995a Suri, R.P.S., J.C. Crittenden, D.W. Hand and D.L. Perram, "Steam Regeneration of Adsorbents, and Photocatalytic Destruction of Organic Compounds", submitted to Water Environment Research, 1995.

Vadrevu, 1995 Vadrevu, S., C.M. Daniel, J.W. Sutherland and W.W. Olson, "A Model for Characterizing Time Varying Product Value", submitted to Transactions ASME Journal of Engineering for Industry, 1995.

Wentland, 1995a Wentland, C.J., W.W. Olson and J.W. Sutherland, "Use of a Reprocessability Index System for the Environmental Scoring of Rotational Parts", submitted for review to 1996 North American Manufacturing Research Institution of SME conference, 1995.

Xue, 1995 S. Xue and C. Nesbitt, "Development of a Process to Produce Lead Oxide from Wastes Containing Lead", accepted for publication in Hydrometallurgy, in press.

Yue, 1995 Yue, Y., W.W. Olson and J.W. Sutherland, "A Model for Mist Generated When Machining with Cutting Fluids", submitted in preparation for 1996 ASMEIMECE Conference, 1995.

Zheng, 1995 Zheng, Y., W.W. Olson and J.W. Sutherland, "Heat Generation in Orthogonal Cutting of a Visco Plastic Material", submitted in preparation for 1996 ASMEIMECE Conference, 1995.

BOOKS OR BOUND PROCEEDINGS

Cozzens, 1995a Cozzens, D.A., W.W. Olson, J.W. Sutherland and J.M. Panetta, "An Experimental Investigation into the Effect of Cutting Fluid Conditions on the Boring of Aluminum Alloys", to appear in ASME Bound Volume, 1995.

Cozzens, 1995b Cozzens, D.A., W.W. Olson and J.W. Sutherland, "An Investigation into the Cutting Fluid Effects on Temperatures in Aluminum Boring", Proceedings of the SME Machining and Grinding Conference, pp. 881-891, 1995.

Crittenden, 1995e Crittenden, J.C., Y. Zhang, D.W. Hand and D.L. Perram, "Destruction of Organic Compounds in Water Using Fixed-Bed Photocatalysts", Solar Engineering, ASME, The 1995 International Solar Energy Conference, 1, 449, 1995.

Eisele, 1994 Eisele, T.C. and S.K. Kawatra, "Dewatering of Fine Particulates from Dilute Silicone Waste Dispersions", Second International Symposium on Metallurgical Processes for the Year 2000 and Beyond, TMS fall meeting, San Diego, CA, September 21-23, 1994.

Hepworth, 1994a Hepworth, M.T. and F.N. Bender, "Recovery of Lime and Sulfur Products from Utility Coal Wastes", Proceedings of the 10th International Conference on Solid Waste Management, University of Pennsylvania and Widener University, November 13-16, 1994.

Hertz, 1995a Hertz, D.W. and R.M. Patty, "Environmentally Conscious Design for Construction: a Kellogg CPAS Tool Development Project", Proceedings of the KELSAFE Conference, M.W. Kellogg, Houston, TX, September 14-15, 1995.

Hoerning, 1995b Hoerning, J.M., M.A. Evans, D.J. Aerts and K.W. Ragland, "Organic Emissions from Combustion of Pine, Plywood and Particleboard", 210th American Chemical Society National Meeting, Chicago, IL, pp. 676-680, August 20, 1995.

Huang, 1995 Huang X., J.Y. Hwang and R. Tieder, "Clean Fly Ash As Fillers In Plastics", Proceedings: 11th International Symposium on Use and Management of Coal Combustion By-Products, (CCBs), 1, pp 33-1 to 33-15, Orlando, FL, January, 1995.

Hwang, 1995a Hwang J.Y., X. Huang, R. Tieder and A. Hein, "Refractory Material Produced From Beneficiated Fly Ash", Proceedings: 11th International Symposium on Use and Management of Coal Combustion By-Products (CCBs), 1, pp 32-1 to 32-13, Orlando, FL, January, 1995.

Hwang, 1995b Hwang, J.Y. and X. Liu, "Beneficiation Process for Fly Ash and the Utilization of Cleaned Fly Ash for Concrete Application", Proceedings: 11th International Symposium on Use and Management of Coal Combustion By-Products (CCBs), 1, pp 11-1 to 11-16, Orlando, FL, January, 1995.

Liu, X., 1995 Liu X. and J.Y. Hwang, "Effect of Fly Ash Beneficiation Process on Quality of Processed Bottom Ash, ESP Fly Ash, Dust Collector Fly Ash, Their Mixtures, and Performance of Concrete Containing these Processed Ash Samples", Proceedings: 11th International Symposium on Use and Management of Coal Combustion By-Products (CCBs), 1, pp 12-1 to 12-16, Orlando, FL, January, 1995.

Philipps, 1994 Philipps, K., S. Vadrevu, W.W. Olson and J.W. Sutherland, "Concurrent Engineering and the Environment", S. Wu Symposium, pp. 349-354, May 1994.

Rekoske, 1993 Rekoske, J.E., R.J. Madon, L.M. Aparicio and J.A. Dumesic, "Microkinetic Analysis of Isobutane Reactions Catalyzed by Y-Zeolite", 10th International Congress on Catalysis, Akademiai, Budapest, Hungary, 1653, 1993.

Vadrevu, 1994b Vadrevu, S., J.W. Sutherland and W.W. Olson, "A Value Model for Use in Environmentally Conscious Design and Manufacturing", published in the Proceedings of the International Mechanical Congress and Exposition, ASME, 681, pp. 93-102, November 1994.

Wentland, 1995b Wentland, C.J., W.W. Olson and J.W. Sutherland, "An Environmental Advisory System for Concept Design: Creation of a Reprocessability Index System", to appear in ASME Bound Volume, 1995.

Whitmer, 1995a Whitmer, C.I., W.W. Olson and J.W. Sutherland, "Determination of Design Effort Distribution for an Environmentally Conscious Product Using a Pairwise Comparison Approach", to appear in ASME Bound Volume, 1995.

Whitmer, 1995b Whitmer, C.I., W.W. Olson and J.W. Sutherland, "Methodology for Including Environmental Concerns in Concurrent Engineering", to appear in Proceedings of First World Conference Integrated Design and Process Technology, 1995.

MAJOR PROJECT REPORTS

Cortright 1995c Cortright, R.D., E. Bergene, P. Levin, M. Natal-Santiago, and J. A. Dumesic, "Reactions of Isobutane and Isobutylene over Silica- and L-Zeolite-Supported Pt/Sn/K Catalysts", Final Report submitted to the National Center for Clean Industrial and Treatment Technologies, October, 1995.

Hepworth, 1995b Hepworth, M.T., "Recovery of Lime and Sulfur from Gypsum and Pyrite Wastes", Final Report submitted to the National Center for Clean Industrial and Treatment Technologies, June, 1995.

Hertz, 1995b Hertz, D.W., P.P. Radecki, T. N. Rogers, B. A. Barna and D. W. Hand, "The Clean Process Advisory System New Process Design Tools for Environmental Sustainability", Status Report submitted to the National Center for Clean Industrial and Treatment Technologies, September 1995.

Hoerning, 1994 Hoerning, J.M. and K.W. Ragland, "Comparison of the Incineration of Photographic Processing Wastes Versus Typical Municipal Wastes Using a Low Temperature Simulated Municipal Incinerator", project report to Eastman Kodak , 1994.

Kindt, 1994 Kindt, L.M., "Determination of Henry's Constants from Pressure Measurements", Department of Chemical Engineering, Michigan Technological University, June 1994.

Lee, 1995 Lee K. and R. Gadh, "Computer Aided Design-for-Disassembly: A Destructive Approach", Technical Report submitted to the University of Wisconsin-Madison, 1995.

Penke, 1994 Penke, B., "Henry's Law Constant Estimation Models", Department of Chemical Engineering, Michigan Technological University, November, 1994.

Rudd, 1995 Rudd, D.F. and A.A. Trevino, "Chemical Industry Planning System Prototype User's Guide", Shanahan Valley Associates, Inc., Madison, WI, August 23, 1995.

Schams, 1994 Schams J.J., "Evaluation of Henry's Law Constant and Activity Coefficient Estimation Models", Department of Chemical Engineering, Michigan Technological University, June 1994.

THESES/DISSERTATIONS

Berthold, 1995 Berthold, U. "Design for Recycling and Reuse Illustrated on a Washing Machine", submitted as a thesis requirement to the Institute fuer Allgemeinen Maschinen bau, Chemnitz, Germany, 1995.

Cozzens, 1995c Cozzens, D.A., "A Study of Cutting Fluids and Workpiece Surface Error in the Boring of Cast Aluminum Alloys", Master of Science Thesis, Michigan Technological University, July 1995.

Kirchhoff, 1995 Kirchhoff, O., "Disassembly: The First Step in Demanufacturing Discarded Products", submitted as a thesis requirement to the University of Aachen, Germany, 1995.

Kutsovskaya, 1995b Kutsovskaya, M., "Recovery of Lime, Sulfur, and Iron via Utilization of Gypsum and Pyrite Wastes", University of Minnesota, In preparation for October, 1995 publication.

Liu, J., 1995d Liu, J.B., "Removal and Destruction of Toxic Organic Contaminations in Water Using Adsorption and Photocatalytic Oxidation," Ph.D. Dissertation, Michigan Technological University, 1995.

Philipps, 1995b Philipps, K.K., "An Investigation on the Shearing of Automotive Grade Polypropylene and Acrylonitrile Butadiene Styrene to Facilitate Recycling", Master of Science Thesis, Michigan Technological University, April, 1995.

Sandell, 1995 Sandell, J.F., "The Fate and Transport of Lead in a Municipal Waste Combustor", Ph.D. Dissertation, Michigan Technological University,1995.

Suri, 1995b Suri, R.P.S., "Thermal Regeneration of Adsorbents, and Photocatalytic Destruction of Hazardous Organic Compounds", Ph.D. Dissertation, Michigan Technological University, 1995.

Sutter, 1995 Sutter, L. L., "Characterization of Lead Bearing Phases in Municipal Waste Combustor Fly Ash", M.S. Thesis, Michigan Technological University, 1995.

Toth, 1995a Toth, T.J., "Development of Software for Chemical Process Evaluation", Master of Science Degree Thesis, Chemical Engineering, Michigan Technological University, October, 1995.

Unger, 1995 Unger, A., W.W. Olson and J.W. Sutherland, "Environmental Advisory System for Concept Design A Design Tool Using the Reprocessability Index System", a thesis paper for the Instituet fuer Allgemeinen Maschinenbau, Chemnitz, Germany, September 1995.

Vadrevu, 1994c Vadrevu, S., "Product Value Modeling of Time Varying Performance Characteristics", Master of Science Thesis, Michigan Technological University , October 1994.

Valjakka, 1994 Valjakka, T.K., "A Cost Simulation Model for Automotive Plastic Bumper Systems: A Life Cycle Approach", Master of Science Thesis, Michigan Technological University, November, 1994.

Voigt, 1994a Voigt, RA, "Modeling Metals Fate in Conventional Wastewater Treatment Plants", Master of Science Thesis, Michigan Technological University, 1994.

Whitmer, 1995c Whitmer, C.I., "A Pairwise Comparison and Analytical Hierarchy Process to Establish Design Decision Making for Demanufacturing", Master of Science Thesis, Michigan Technological University, September 1995.

CONFERENCES AND WORKSHOPS HELD

1. "1994 Project Review and 4th Scientific Advisory Committee Meeting", Houghton, Michigan, 44 attendees, October 4-5, 1994.

2. First National Working Meeting on Coordinating Clean Technology Research Programs: "First Clean Process Advisory System National Working Meeting", CoSponsored by Center for Waste Reduction Technologies and National Center for Manufacturing Sciences, Hosted by Texas Instruments, Inc., Dallas, Texas, 85 attendees, October 27-28, 1994.

3. "1995 Proposal Review and 5th Scientific Advisory Committee Meeting", Madison, Wisconsin, 35 attendees, March 27-28, 1995.

4. "Vision 2000: CenCITT Strategic Planning Program I", internal working meeting for program planning, 7 attendees, Wausau, Wisconsin, July 10-11, 1995.

5. Second National Working Meeting on Coordinating Clean Technology Research Programs: "Fast-Tracking Priority Pollution Prevention Research", CoSponsored by Center for Waste Reduction Technologies and National Center for Manufacturing Sciences, held in conjunction with AIChE 1995 National Summer Meeting, approximately 50 attendees, August 2, 1995.

6. "Vision 2000: CenCITT Strategic Planning Program II", internal working meeting to converge individual project vision statements into Focus Area plans, Wausau, Wisconsin, 10 attendees, August 25, 1995.

PATENT DISCLOSURES

Cameron, 1995a Cameron, D.C., F.A. Skraly and B. Lytle, "Genetic Constructs and Method for the Production of 1,3-Propanediol", U.S. Patent Application filed June, 1995.

Cameron, 1995b Cameron, D.C. and F.A. Skraly, "Novel Glycerol Phosphatase with Stereo-Specific Activity", U.S. Patent Application filed August, 1995.

Cortright, 1994b Cortright, R.D. and J.A. Dumesic, "Dehydrogenation Catalyst System", U.S. Patent Application filed October 5, 1994.

RESEARCH PRESENTATIONS MADE

Baker, 1995a Baker, J.R., M. Zanoni, R. Hossli and P.P. Radecki, "A Demonstration Version of the Clean Process Advisory System (CPAS)", Fast-Tracking Priority Pollution Prevention, 1995 AIChE National Summer Meeting, Boston, MA, August 2, 1995.

Baker, 1995b Baker, J.R., "Overview of the National Center for Clean Industrial and Treatment Technologies and a Collaborative Project: The Clean Process Advisory System", Michigan Industrial Exposition, April 13, 1995.

Brendley, 1995 Brendley, W.H., "Environmental Technologies for Pollution Prevention, Control & Remediation", World Environmental Congress, London, Ontario, Canada, September 17-22, 1995.

Cameron, 1995c Cameron, D.C., F.A. Skraly, B.L. Willard, M.Y. Zhu, A.M. Held and A.J. Shaw, "Metabolic Engineering of Three-Carbon Metabolism", Biochemical Engineering IX, Davos, Switzerland, May, 1995.

Cameron, 1995d Cameron,D.C., A.M. Held, M.Y. Zhu and F.A. Skraly, "Microbial Conversion of Glycerol to 1,3-Propanediol and Related Compounds", Biotechnology Secretariat, Abstract No. 131, 209th American Chemical Society National Meeting, Anaheim, CA, April, 1995.

Cozzens, 1994a Cozzens, D.A., J.W. Sutherland and W.W. Olson, presentations to Ford Motor Company, Livonia, MI, June, July, and August, 1994.

Cozzens, 1994b Cozzens, D.A., J.W. Sutherland and W.W. Olson, "Impact of Cutting Fluids on Boring Operations", Ford Motor Company, Livonia, MI, October 1994.

Crittenden, 1995f Crittenden, J.C., Y. Zhang, D.W. Hand and D.L. Perram, "Destruction of Organic Compounds in Water Using Fixed-bed Photocatalysts", 1995 International Solar Energy Conference, Maui, Hawaii, March 19-24, 1995.

Cussler, 1995 Cussler, E.L., T. Pennaz and J. Burban, "A VOC-Free Lithographic Printing System", Fast-Tracking Priority Pollution Prevention-II/Session 9, 1995 AIChE National Summer Meeting, Boston, MA, 1995.

Durfee, 1995b Durfee, M.H. and P.P. Radecki, "A Haystack of Needles: Problems and Strategies of Ecosystem Management of Lake Superior", International Studies Association Meeting, Chicago, IL, February 22-25, 1995.

Freeman, 1994a Freeman, H.M., "Pollution Prevention", Association of Environmental Engineering Professors Workshop, Chicago, IL, October 18, 1994.

Gadh 1995 Gadh, R., "Design for Disassembly", presented to the College of Engineering, University of Wisconsin-Madison, Madison, WI, Engineering Day, October 8, 1995.

Haan, 1995b Haan, D.M., J.W. Sutherland and W.W. Olson, presentations to Ford Motor Company, Livonia, MI, June, July, and August, 1995.

Hand, 1995c Hand, D.W., A.S. Mayer, J.R. Mihelcic, D.R. Hokanson, T. N. Rogers and J.C. Crittenden, "Development of Effluent Treatment Design Option Tools for the Clean Process Advisory System (CPAS)", Fast-Tracking Priority Pollution Prevention, 1995 AIChE National Summer Meeting, Boston, MA, August 2, 1995.

Hepworth, 1995c Hepworth, M. T., "Recovery of Lime and Sulfur Products from Utility Coal Wastes", Conference on New Directions for the Minerals Industry, Society of Mining, Metallurgy and Petroleum Engineers, Minneapolis, MN, October 13, 1995.

Hertz, 1995c Hertz, D.W., P.P. Radecki, T. Toth, J.C. Crittenden and C. Vinton, "Panel Discussion Reports from CPAS Development Teams", Fast-Tracking Priority Pollution Prevention, 1995 AIChE National Summer Meeting, Boston, MA, August 2, 1995.

Hertz, 1995d Hertz, D.W., G. Reading, "Review and Demonstration of CWRT's CPAS Process Design Tools", Fast-Tracking Priority Pollution Prevention, 1995 AIChE National Summer Meeting, Boston, MA, August 2, 1995.

Hokanson, 1995b Hokanson, D.R., T.N. Rogers, D.W. Hand, F. Gobin, M.D. Miller, J.C. Crittenden and J.E. Finn, "A Physical Property Resource Tool for Water Treatment Unit Operations", Universities Forum, American Water Works Association Annual Conference, Anaheim, CA, June 18-22, 1995.

Hokanson, 1995c Hokanson, D.R., T.N. Rogers, D.W.Hand, F. Gobin, M.J. Buchkowski and M.D. Miller, "Software to Estimate Physical Properties", Envirosoft '94: Computer Techniques in Environmental Studies, San Francisco, CA, November 16-18, 1994.

Kawatra, 1994 Kawatra, S.K. and A.K. Bakshi, "Determination of Changes in Rheological Properties of Mineral Slurries", AIChE 1st International Particle Technology Forum, Denver, CO, August 17-19, 1994.

Loll, 1996 Loll, A.W. and T.N. Rogers, "Estimation of High Temperature VLE Physical Properties Using a Structure-Based Group Contribution Model", accepted for presentation at the 1996 AIChE National Spring Meeting, Session Title: Thermophysical Properties for Environmental Applications, New Orleans, February 1996.

Nesbitt, 1995 Nesbitt, C.C. and S. Xue, "Recycling of Base Metals from Metal Wastes of Brass Foundries", in International Symposium on Treatment and Minimization of Heavy Metal Containng Waste, 1995 Annual Meeting of TMS-AIME, February, 1995.

Nesbitt, 1996 Nesbitt, C. C. and S. Xue, "Process Development for Recovery of Lead as Lead Monoxide from Lead-Bearing Waste", in 2nd International Symposium on Treatment and Minimization of Heavy Metal Containing Waste, 1996 TMS-AIME, Scottsdale, AZ, Oct. 1996.

Olson, 1995 Olson, W.W. and J.W. Sutherland, "The Effects of Cutting Fluids on Machining Processes Performed on Aluminum", Ford Motor Company Manufacturing Engineering Forum, October 1995.

Radecki, 1995a Radecki, P.P., "Cost Savings and Agility in R&D Through Alignment of Agendas and Program Area Funding", Fast-Tracking Priority Pollution Prevention, 1995 AIChE National Summer Meeting, Boston, MA, August 2, 1995.

Radecki, 1995b Radecki, P.P., "An Introduction to Pollution Prevention-Enabling Product Design Tools", presented at the National Center for Manufacturing Sciences ECM Strategic Initiative Group, Research Triangle Park, NC, January 11, 1995.

Radecki, 1995c Radecki, P.P., "Industry-University Collaborative Projects of the Clean Process Advisory System", presented at the National Center for Manufacturing Sciences Annual Meeting, Orlando, FL, May 22-23, 1995.

Radecki, 1995d Radecki, P.P., "Process Design Tools: The Cutting Edge", presented at the National Institute for Standards and Technology ATP Separation Technologies Workshop, Gaithersburg, MD, February 23, 1995.

Radecki, 1995e Radecki, P.P., "Strategic Plan for the Pollution Prevention and Assessment Modules EPA Cooperative Agreement", presented at Center for Waste Reduction Technologies TTC Meeting, August 2, 1995.

Radecki, 1995f Radecki, P.P. and R. Grote, "The Clean Process Advisory System - A Promising New Way to Navigate the Ocean of Environmental Technology Information", National Pollution Prevention Roundtable Meeting, Austin, TX, April 2-5, 1995.

Rogers, 1995a Rogers, T.N., "Development of a Physical Property Management System as an Expandable Framework for Data Display and Retrieval", presented at the National Institute of Standards and Technology, Boulder, CO, July 29, 1995.

Rogers, 1995b Rogers, T.N., "Development of a Pollution Assessment Module for Ranking Pollution Prevention Process Design Options", Presented at the National Institute of Standards and Technology, Boulder, CO, July 29, 1995.

Rogers, 1995c Rogers, T.N., "Thermodynamics of Emissions", Clean Air Acts Title 5, Air Emissions Technical Workshop, sponsored by the Alabama Chemical Association (AlaChem) and the Air and Waste Management Association, Birmingham, AL, May 25-26, 1995.

Rogers, 1995d Rogers, T.N., D.R. Hokanson, D.W. Hand, F. Gobin, M.D. Miller, J.C. Crittenden, J.E. Finn and A.A. Kline, "Status of Developments in Physical Property Data Delivery for Pollution Prevention", Fast-Tracking Priority Pollution Prevention, 1995 AIChE National Summer Meeting, Boston, MA, August 2, 1995.

Rudd, 1993 Rudd, D.F., L.M. Aparicio, J.E. Rekoske, A.A. Trevino and J.A. Dumesic, "The Microkinetics of Heterogeneous Catalysis", American Chemical Society, Washington D.C., 1993.

Shonnard, 1995a Shonnard, D.R., T. Laurvick and A.S. Mayer, "Critical Evaluations of Pollutant Fate and Risk Models for Pollution Prevention", Fast-Tracking Priority Pollution Prevention, 1995 AIChE National Summer Meeting, Boston, MA, August 1, 1995.

Shonnard, 1995b Shonnard, D.R., J.M. Markey and P.A. Deshpande, "Evaluation of Unit Operation-Specific Emission Databases", Fast-Tracking Priority Pollution Prevention, 1995 AIChE National Summer Meeting, Boston, MA, August 1, 1995.

Skraly, 1994 Skraly, F.A., B.L. Willard and D.C. Cameron. "Microbial Production of 1,3-Propanediol: Pathway Design and Analysis", Paper 36e, 1994 AIChE Annual Meeting, San Francisco, CA, November 13-18, 1994.

Sutherland, 1995a Sutherland, J.W., "Programmatic Activities in Manufacturing at MTU", seminar at Norton Company, Worchester, MA, July 31, 1995.

Sutherland, 1995b Sutherland, J.W., "Questioning the Traditional Role of Cutting Fluids in Machining", presentation at the SME Advances in Metalworking Fluids Workshop, Fort Mitchell, KY, March 29, 1995.

Suri, 1994a Suri, R. P.S., J. C. Crittenden, D. W. Hand, and M. Dziobak, "Removal and Destruction of Hazardous Organic Contaminants in Water Using Adsorption and Photocatalysis", presented at Water Environmental Federation Conference, Chicago, IL, October 1994.

Suri, 1994b Suri, R. P.S., J. Liu, D. W. Hand, J. C. Crittenden, D. L. Perram, and M. Mullins, "Heterogeneous Photocatalytic Oxidation of Hazardous Organic Contaminants in Water", presented at Water Environmental Federation Student Activities Committee in San Diego, October, 1993.

Toth, 1995b Toth, T., "Desarrollo de un Paquete de Compota para la Evaluacion de Diseno Deplantas y de Algoros Aspetos Ambientales", Division de Ingenieria Universidad de Sonora, Hermosillo, Mexico, March 17, 1995.

Toth, 1995c Toth, T. and B.A. Barna, "Development of a Design Option Ranking Tool", 1995 AIChE National Spring Meeting, Houston, TX, March 21, 1995.

VanderVelde, 1995 VanderVelde, G., "Overview of CenCITT Programs and Collaboration", National Center for Manufacturing Sciences National Meeting, Orlando, FL, May 22-23, 1995.

Voigt, 1994b Voigt, R.A., A.S. Mayer and V.J. Wildfong, "Modeling the Fate of Hazardous Compounds in Conventional Wastewater Treatment within a Waste Minimization Framework", Envirosoft 94: Computer Techniques in Environmental Studies, San Francisco, CA, November 17, 1994.

Whitmer, 1994 Whitmer, C.I., W.W. Olson, J.W. Sutherland and B. Rahali, "Special Report to Whirlpool Corporation," Whirlpool Corporation, July 19, 1994.

Zhang, 1994 Zhang, Y., J. C. Crittenden, D. W. Hand, D. L. Perram, and E. G. Marchand, "Solar Detoxification of Groundwater Using Fixed-Bed Photocatalysts," presented at Water Environmental Federation 67th Annual Conference, Chicago, IL, October 1994.

TECHNOLOGY TRANSFER ACTIVITIES AND PRESENTATIONS

(See also Conferences and Workshops Held, and Presentations Made)

Baker, 1995c Baker, J.R., P.P. Radecki, T.J. Toth, D.W. Hertz, C. Vinton, B.A. Barna,"Clean Process Advisory System", booth display and software demonstrations, CoSponsored with CWRT and NCMS, AIChE 1995 Spring National Meeting and PetroExpo, Houston, TX, March 18-20, 1995.

Baker, 1995d Baker, J.R. and Radecki, P.P., "Clean Process Advisory System", booth display and software demonstrations, CoSponsored with CWRT and NCMS National Center for Manufacturing Sciences National Meeting, Orlando, FL, May 22-23, 1995.

Barna, 1994 Barna, B.A. and P.P. Radecki, "Collaborative Opportunities with CenCITT", presented to Division de Ingenieria Universidad de Sonora representatives, Houghton, MI, November 1, 1994.

Crittenden, 1995g Crittenden, J.C. and P.P. Radecki, "CenCITT Overview", presentation to new EPA Project Officer Gregory Ondich and Stephen Lingle, Washington, DC, July 6, 1995.

Freeman, 1994b Freeman, H.M., C.R. Baillod and P.L. Bishop, presentations and participation at Association of Environmental Engineering Professors Workshop, Chicago, IL, October 18, 1994.

Hertz, 1994a Hertz, D.W., "Overview of Clean Process Advisory System", National Institute for Standards and Technology, Gaithersburg, MD, October 23-25, 1994.

Hwang, 1994 Hwang, J.Y., R.E. Tieder, J.C. Crittenden, and P.P.Radecki, "Development of a Collaboration in Environmental Systems Engineering", presented to representatives of the TI Group, Inc., Houghton, MI, December 15, 1994.

Hwang, 1995c Hwang, J.Y., R.E. Tieder, P.P. Radecki, "Environmental Systems Engineering Center Working Meeting", participants in meeting to develop a multiuniversity, multi-industry center hosted by the TI group, Washington, DC, February 20, 1995.

Quigley, 1995 Quigley, J.T. and R.E. Tieder, presentations at Great Lakes Pollution Prevention Roundtable Meeting, Sarnia, Ontario, Canada, August 10-11, 1995.

Radecki, 1994a Radecki, P.P., "CenCITT Overview", presented to Westinghouse Corporation representatives, Houghton, MI, October 12, 1994.

Radecki, 1994b Radecki, P.P. and J.C. Crittenden, "CenCITT Overview", presented to Louis Thibedeaux, Director of Hazardous Substance Research Center, Louisiana State University, Houghton, MI, November 10, 1994.

Radecki, 1995g Radecki, P.P., "Collaboration Opportunities between CenCITT and OIT", presented to U.S. Department of Energy Office of Industrial Technologies representatives, Washington, DC, February 14, 1995.

Radecki, 1995h Radecki, P.P., J.C. Crittenden, T.N. Rogers, D.W. Hertz, "Opportunities for Coordination between CPAS, PDXI and Physical Property Management Systems", presented at a working meeting sponsored by National Institute for Standards and Technology, Gaithersburg, MD, February 15, 1995.

Radecki, 1995i Radecki, P.P., "Environmental Systems Engineering Center Working Meeting Planning Session", meeting with TI Group representatives to plan Feb. 22, 1995 Working Meeting (see Hwang, 1995c), February 16, 1995.

Radecki, 1995j Radecki, P.P., "Overview of CPAS Activities at CenCITT", presented at the Center for Waste Reduction Technologies TTC Meeting, March 18, 1995.

Radecki, 1995k Radecki, P.P., "CenCITT's Program and Approach to Collaboration", presented to Thomas Baldini, U.S. Chair of International Joint Commission, Houghton, MI, April 19, 1995.

Radecki, 1995l Radecki, P.P., "Opportunities for NIST Data Resources to be Util ized in CPAS", presented to National Institute for Standards and Technology, Gaithersburg, MD, April 24, 1995.

Radecki, 1995m Radecki, P.P., "Potential Coordination Between CPAS and the NPPR Proposed National Pollution Prevention Information Network", presented to National Pollution Prevention Roundtable Executive Director, Washington, DC, April 27, 1995.

Radecki, 1995n Radecki, P.P., D.W. Hertz and C. Vinton, "Clean Process Advisory System", booth display and software demonstrations, CoSponsored with CWRT and NCMS, Department of Energy Office of Industrial Technology 1st International Symposium on Energy Efficiency and Waste Minimization, Washington, DC, April 30-May 3, 1995.

Radecki, 1995o Radecki, P.P., "Exploratory Discussions of Physical Property Management Systems", presented to representatives of Simulation Sciences, Inc. and The M.W. Kellogg Company, Houghton, MI, June 12, 1995.

Radecki, 1995p Radecki, P.P., J.C. Crittenden and T.N. Rogers, "First Meeting of the Pollution Prevention Process Simulation Work Group", U.S. Environmental Protection Agency, Cincinnati, OH, September 12-13, 1995.

Radecki, 1995q Radecki, P.P., D.L. Stoh, "CenCITT Programs and Collaboration", poster presentation, ACS Corporate Affiliates 7th Annual Hazardous Waste Minimization Conference, Atlanta, GA, September 19-20, 1995.



Back to Table of Contents