Ashai, Z., N. Shyamsundar, and R. Gadh, "Shape Based Design for Disassembly of Virtual Prototypes", submitted to the Journal of Engineering for Industry, ASME TRANSACTIONS, 1995.

Batzer, S.A., T. Cao, and J.W. Sutherland, "Effects of Cutting Fluid Composition on the Dimensional Accuracy of Tapped Threads", submitted to NAMRC XXVII, 1998.

Batzer, S.A., P.D. Rao, W.W. Olson and J.W. Sutherland, "An Experimental Investigation into the Effects of Cutting Conditions on Chip Morphology", submitted to S.Wu Symposium, 1996.

Cortright, R.D., R. Watwe, B.E. Spiewak, and J.A. Dumesic, "Ethane Hydrogenolysis over Silica-Supported Pt and Pt/Sn Catalysts: Experimental and DFT Studies", in preparation, 1997.

Daniel, C.M., K.V.C Rao, W.W. Olson, J.W. Sutherland, "Analysis of Cutting Fluid Effects on Heat Transfer in Machining", submitted for review to 1996 Japan/USA Symposium, 1995.

Dewey, G.R., J.F. Sandell, L.L. Sutter and J.A. Willemin, "Evaluation of Lead Phases Following Leaching of Municipal Waste Combustor Fly Ash", submitted to the ASCE Journal of Environmental Engineering, 1995.

Dewey, G. R., Sutter, L. L, and Sandell, J. F, "Identification of Lead Bearing Phases in Municipal Waste Combustor Fly Ash", submitted to the Journal of Air and Waste Management, 1997.

Durfee, M.H. and P.P. Radecki, "A Haystack of Needles: Problems and Strategies of Ecosystem Management of Lake Superior", accepted for Sustainable Development, 1995.

Gadh, R., H. Srinivasan, N. Shyamsundar, and R. Figueroa, "Virtual Disassembly-A Software Tool For Developing Product Dismantling And Maintenance Systems", submitted for publication in the Annual Reliability and Maintainability Symposium, Anaheim, CA, 1998.

Gunter, K. and J.W. Sutherland, "An Experimental Investigation into the Effect of Process Conditions on the Mass Concentration of Cutting Fluid Mist in Turning", submitted to Journal of Cleaner Production, 1998.

Haan, D.M., W.W. Olson and J.W. Sutherland, "The Mechanisms of Metal Cutting Fluids in Machining Aluminum Alloys", submitted to AAMA, 1995.

Hand, D.W., A.N. Ali, J.L. Bulloch, M.L. DeBraske, J.C. Crittenden, and D.R. Hokanson, "Adsorption Equilibrium Modeling of the International Space Station Waste Waters", submitted to Journal of Environmental Engineering, 1997.

Hand, D.W., F. Gobin, D.R. Hokanson, J.C. Crittenden, and T.N. Rogers, "Adsorption Simulation Software (AdSim™)", submitted to Environmental Progress, 1997.

Hand, D.W., R.T. Rollman, J.C. Crittenden, D.L. Perram and Y. Zhang, "Destruction of Volatile Organic Compounds Using Air-Phase Photocatalysis", submitted to Journal of Air and Waste Management, 1995.

Hepworth, M.T. and F.N. Bender, "Recovery of Lime and Sulfur Products from Utility Coal Wastes", submitted to the Journal of Resource Management and Technology, 1995.

Hiew, D.S. and D.R. Shonnard, "Environmental Assessment and Optimization of Chemical Process Designs: II. Applications", submitted to Environmental Science and Technology, 1999.

Hokanson, D.R., D.W. Hand, and J.C. Crittenden, "Aeration System Analysis Program", submitted to Environmental Progress, 1997.

Hokanson, D.R., T.N. Rogers, D.W. Hand, J.C. Crittenden, and J.N. Fass, "Physical Properties for Water and Air Treatment: Combining Critically Evaluated Data with Quantitative Structure Activity Relationships", submitted to Water Research, 1999.

Hokanson, D.R., T.N. Rogers, D.W. Hand, F. Gobin, M.D. Miller, J.C. Crittenden and J.E. Finn, "A Physical Property Resource Tool for Water Treatment Unit Operations", submitted to Environmental Science & Technology, 1995.

Hokanson, D.R., T.N. Rogers, D.W. Hand, M.D. Miller, and J.C. Crittenden, "A Physical Property Resource Tool For Air and Water Treatment Unit Operations", submitted to Environmental Progress, 1997.

Jacque, G., J.C. Crittenden, D.L. Perram, V.H. Selzer, and D.W. Hand, "Photocatalytic Destruction of Gas Phase Organic Contaminants", submitted to Journal of Air and Waste Management, 1997.

Kawatra, S.K. and T.C. Eisele, "Removal of Unburned Carbon from Fly Ash by Froth Flotation", to be presented at the SME 1996 Annual Meeting, 1995.

Kawatra, S.K., and T.C. Eisele, "Removal of Unburned Carbon from Fly Ash by Froth Flotation," submitted to the Society of Mining and Metallurgical Engineering, 1994.

Liu, J.B., J.C. Crittenden, D.W. Hand and D.L. Perram, "Removal and Destruction of Organic Contaminants in Water Using Adsorption, Steam Regeneration, and Photocatalytic Oxidation-Pilot Study", submitted to Journal of AWWA, 1995.

Liu, J., J. C. Crittenden, D.W. Hand, and D.L. Perram, "Removal and Destruction of Organic Contaminants in Water Using Adsorption, Steam Regeneration, and Photocatalytic Oxidation", submitted to Journal of Environmental Engineering, 1996.

Nesbitt, C.C., S. Xue, "Recycling of Base Metals from Metal Wastes of Brass Foundries", 1994.

Patty, R.M., D.W. Hertz, C.R. Baillod and J.W. Sutherland, "Environmentally Conscious Design for Construction", submitted to ASCE Journal of Construction Engineering and Management, 1995.

Patty, R.M., R. McCullouch, and D.W. Hertz, "Ergonomics of a Design Tool for Constructability Lessons Learned", submitted to Construction Engineering and Management Journal, ASCE, 1997.

Rogers, T.N., M.D. Miller, A.A. Kline, M.E. Mullins, A.W. Loll, and D.M. Wieber, "Development of a Physical Property Management System for Data Delivery to Scientists and Design Engineers", submitted to Fluid Phase Equilibria, 1997.

Shonnard, D.R. and D.S. Hiew, "Environmental Assessment and Optimization of Chemical Process Designs: I. Assessment Framework", submitted to Environmental Science and Technology, 1999.

Shyamsundar, N., H. Srinivasan, and R. Gadh, "A Geometric Algorithm for Selective Disassembly Analysis", submitted to Journal of Manufacturing Science and Engineering, ASME TRANSACTIONS, 1996.

Shyamsundar, N. and R. Gadh, "Part II: Assembly Validation through Disassembly Sequencing Using the Convex Hull and the Relative Convex Hull", submitted to Transactions of the ASME, Journal of Manufacturing Science and Engineering, 1997.

Shyamsundar, N. and R. Gadh, "Part I: Determination of Component Disassembly Using the Relative Convex Hull", submitted to Transactions of the ASME, Journal of Manufacturing Science and Engineering, 1997.

Shyamsundar, N. and R. Gadh, "Evaluation Methods for Disassembly Sequences", submitted 1995, resubmitted to Transactions of the ASME, Journal of Engineering for Industry, 1997.

Spiewak, B.E., R.D. Cortright and J.A. Dumesic, "Thermochemical Characterization of Heterogeneous Catalysts", Handbook of Heterogeneous Catalysis, VCH Verlagsgesellschaft mbH, Weinheim, Germany, 1995.

Spiewak, B.E., J. Shen and J.A. Dumesic, "Microcalorimetric Studies of CO and H2 Adsorption on Nickel Powders Promoted with Potassium and Cesium", submitted to the Journal of Physical Chemistry, 1995.

Srinivasan, H. and R. Gadh, "Complexity Reduction in Geometric Selective Disassembly Using the Wave Propagation Abstraction", submitted to IEEE Transactions on Robotics and Automation, 1998.

Srinivasan, H. and R. Gadh, "Efficient Disassembly of Multiple Components in an Assembly Using Wave Propagation", submitted to ASME Journal of Mechanical Design, 1998.

Srinivasan, H. and R. Gadh, "Efficient Geometric Disassembly of Multiple Components from an Assembly Using Wave Propagation", submitted to Transactions of the ASME, Journal of Mechanical Design, 1997.

Srinivasan, H. and R. Gadh, "A Non-Interfering Selective Disassembly Sequence for Components With Geometric Constraints", submitted to the IIE Transactions on Design and Manufacturing, 1999.

Srinivasan, H. and R. Gadh, "A Polynomial Geometric Algorithm for Single Selective Disassembly using the Wave Propagation Abstraction", submitted to Computer-Aided Design Journal, Elsevier Publications, 1997.

Srinivasan, H., N. Shyamsundar, K.H. Lee, R. Figueroa, and R. Gadh, "Virtual Disassembly-A Software Tool To Assess Product Design For De-Manufacturing", submitted to IEEE International Symposium on Electronics and the Environment, Illinois, 1998.

Suri, R.P.S., J.C. Crittenden, D.W. Hand, and D.L. Perram, "Steam Regeneration of Adsorbents, and Photocatalytic Destruction of Organic Compounds", submitted to Journal of Environmental Engineering, 1996.

Suri, R.P.S., J.C. Crittenden, D.W. Hand and D.L. Perram, "Steam Regeneration of Adsorbents, and Photocatalytic Destruction of Organic Compounds", submitted to Water Environment Research, 1995.

Sutter, L.L., J.F. Sandell, G.R. Dewey, "Electron Microprobe and Mineral Liberation Analysis Techniques to Characterize Combustion Residuals", submitted to the Minerals, Metals and Materials Society, TMS.

Vadrevu, S., C.M. Daniel, J.W. Sutherland and W.W. Olson, "A Model for Characterizing Time Varying Product Value", submitted to Transactions ASME Journal of Engineering for Industry, 1995.

Watwe, R., B.E. Spiewak, R.D. Cortright, and J.A. Dumesic, "Microcalorimetric Studies and Quantum Chemical Calculations of CO Adsorption on Pt Clusters Supported in L-zeolite", submitted to Catalysis Letters, 1997.

Wentland, C.J., W.W. Olson and J.W. Sutherland, "Use of a Reprocessability Index System for the Environmental Scoring of Rotational Parts", submitted for review to 1996 North American Manufacturing Research Institution of SME conference, 1995.

Willemin J.A., G.R. Dewey, J.F. Sandell, L.L. Sutter, "The Influence of Adsorption Mechanisms on Lead and Cadmium Leaching from Municipal Solid Waste Combustor Fly Ash", submitted to Environmental Science and Technology, 1994.

Xue, S. and C.C. Nesbitt, "Development of a Process to Produce Lead Oxide from Wastes Containing Lead", accepted for publication in Hydrometallurgy, in press.

Yaluris, G., R.J. Madon, and J.A. Dumesic, "Factors Controlling the Selectivity of Isoheptane Cracking Reactions on Olefin-Selective Catalysts," to be submitted to Journal of Catalysis.

Yaluris, G., R.J. Madon, and J.A. Dumesic, "Microkinetic Analysis of Isoheptane Cracking Reactions on US Y-zeolites," to be submitted to Journal of Catalysis.

Yu, J., J.C. Crittenden, and D.W. Hand, "The Correlation of Single Solute Adsorption from Aqueous Solution", to be submitted, 1997.

Yue, Y., K.L. Gunter, D.J. Michalek, and J.W. Sutherland, "An Examination of Cutting Fluid Mist Formation in Machining", submitted to NAMRC XXVII, 1998.

Yue, Y., W.W. Olson and J.W. Sutherland, "A Model for Mist Generated When Machining with Cutting Fluids", submitted in preparation for 1996 ASMEIMECE Conference, 1995.

Zheng, Y., W.W. Olson and J.W. Sutherland, "Heat Generation in Orthogonal Cutting of a Visco Plastic Material", submitted in preparation for 1996 ASMEIMECE Conference, 1995.