CenCITT 1992-99 BOOKS, CHAPTERS, OR BOUND PROCEEDINGS

---

Batzer, S.W., P.D. Rao, D.M. Haan, W.W. Olson, and J.W. Sutherland, "An Experimental Investigation of Chip Morphology in Drilling", Proceedings of the 2^nd S.M. Wu Symposium on Manufacturing Science, pp. 102-107, May, 1996.

Cao, T., S.A. Batzer, and J.W. Sutherland, "Experimental Investigations of Tapped Thread Surface Roughness for Cast Aluminum Alloys", Manufacturing Science and Engineering, ASME Bound Volume - MED Vol. 6-1, pp. 189-195, November, 1997.

Chen, H., B.R. O’Donnell, D.R. Shonnard, T.N. Rogers, B.A. Barna, E.J. Oman, and A.A. Kline, "Defining an Analytic Hierarchy Process (AHP)-Based Approach for Simultaneous Consideration of Environmental and Economic Process Attributes", AIChE Annual Meeting, Dallas, TX, Paper 217d, October-November, 1999.

Cortright, R.D., E. Bergene, P. Levin, M. Natal-Santiago, and J.A. Dumesic, "Reactions of Isobutane and Isobutylene over Silica- and L-Zeolite-Supported Pt/Sn and Pt/Sn/K Catalysts", in Proceeding of 11th International Congress on Catalysis - 40th Anniversary, Studies in Surface Science and Catalysis, Vol. 101, pp. 1185-1194, 1996.

Cozzens, D.A., W.W. Olson, J.W. Sutherland and J.M. Panetta, "An Experimental Investigation into the Effect of Cutting Fluid Conditions on the Boring of Aluminum Alloys", to appear in ASME Bound Volume, 1995.

Cozzens, D.A., W.W. Olson and J.W. Sutherland, "An Investigation into the Cutting Fluid Effects on Temperatures in Aluminum Boring", Proceedings of the SME Machining and Grinding Conference, pp. 881-891, 1995.

Crittenden, J.C., H. Hautakangas J.R. Mihelcic, H. Li, and E.J. Oman, "Optimization and Modeling of Biofiltration for Odor Control", Proceedings of the WEFTEC ’99, 72^nd Annual Water Environment Federation (WEF) Conference and Exposition, New Orleans, LA, October, 1999.

Crittenden, J.C., D.R. Shonnard, P.P. Radecki, and J.L. Bulloch, eds., Emerging Separation and Separative Reaction Technologies, American Institute of Chemical Engineers, in press, 1999.

Crittenden, J.C., V.H. Selzer, D.W. Hand, D.L. Perram, Y. Chen, and M.E. Mullins, "Toward the Development of Commercial Applications of Photocatalysis", Proceedings of the 1998 Pan-American Workshop on Commercialization of Advance Oxidation Technologies, London, Ontario, pp. 30-1 to 30-25, June, 1998.

Crittenden, J.C., Y. Zhang, D.W. Hand and D.L. Perram, "Destruction of Organic Compounds in Water Using Fixed-Bed Photocatalysts", Solar Engineering, ASME, The 1995 International Solar Energy Conference, 1, 449, 1995.

Daniel, C.M., K.V.C. Rao, W.W. Olson, and J.W. Sutherland, "Effect of Cutting Fluid Properties and Application Variables on Heat Transfer in Turning and Boring Operations", Proceedings of the Japan - U.S.A. Symposium on Flexible Automation, pp. 1119-1126, July, 1996.

Daniel, C.M., W.W. Olson, and J.W. Sutherland, "Research Advances in Dry and Semi-Dry Machining", Proceedings of the SAE DFE Conference, Technical Paper No. 970415, February, 1997.

Dechapanya, W., T.N. Rogers, J.R. Baker, and P.P. Radecki, "Application of the Analytic Hierarchy Process for Integrating Environmental Considerations into Process Design Decisions", book chapter in Tools and Methods for Pollution Prevention (S.K. Sikdar and U. Diwekar, Editors), Kluwer Academic Publishers (Dordecht, The Netherlands), pp. 367-383, 1999.

Dewey, G. R., Sutter, L. L, and Sandell, J. F., "Reactivity Based Approach for Classifying Fly Ash", Proceedings of the American Power Conference, Chicago, IL, April, 1996.

Dewey, G.R., M.A. Kayser, L.L. Sutter, "Characterization of Electric Utility Coal Fly Ash for Use in Portland Cement Concrete," The Proceedings of the American Power Conference, Chicago, IL, April, 1994.

Dewey, G.R., M.L. Movrich, "Municipal Solid Waste Incinerator Bottom Ash as an Aggregate Substitute in Hot-Mix Bituminous Mixtures," Proceedings, FHWA/EPA Symposium on Recovery and Effective Reuse of Discarded Materials and By-Products for Construction of Highway Facilities, Denver, CO, Oct 20, 1993.

Dewey G. R., M.A. Kayser, L.L. Sutter, "Microscopic Characterization of Coal Fly Ash for Use in Concrete", Accepted for Publication in The Proceedings of the Fifth International Conference on Fly Ash, Silica Fume, Slag, and Natural Pozzolans in Concrete, Milwaukee, Wisconsin, June 1995.

Eisele, T.C. and S.K. Kawatra, "Dewatering of Fine Particulates from Dilute Silicone Waste Dispersions", Second International Symposium on Metallurgical Processes for the Year 2000 and Beyond, TMS fall meeting, San Diego, CA, September 21-23, 1994.

Figueroa, A., B.A. Barna, and A. Kursenhauser, "Modeling and Optimization of Steam Generating Equipment", Proceedings of the 32nd Intersociety Energy Conversion Engineering Conference, Vol 3, pp 1600-1605, Honolulu, Hawaii, July/August, 1997.

Gadh, R., H. Srinivasan, N. Shyamsundar, and R. Figueroa, "Virtual disassembly - A Software Tool for Developing Product Dismantling and Maintenance Systems", Proceedings of the Symposium on Reliability and Maintainability, pp. 120-125, Anaheim, CA, January, 1998.

Haan, D.M., W.W. Olson, and J.W. Sutherland, "The Mechanisms of Metal Cutting Fluids in Machining Aluminum Alloys", Proceedings of the Symposium on Assessment and Control of the Industrial Metalworking Environment, pp. 301-306, November, 1995.

Hand, D.W., Y. Zhang, E.G. Klun, and J.C. Crittenden, "Photocatalytic Decontamination of Water Using Sunlight and TiO₂ Impregnated Adsorbent and Non-adsorbent Supports," presented at The First International Conference on TiO₂ Photocatalytic Purification and Treatment of Water and Air on November 8-13, 1992.

Hand, D.W., J.C. Crittenden, D.R. Hokanson, and J.L. Bulloch, "Predicting the Performance of Fixed-Bed Granular Activated Carbon Adsorbers", Proceedings First IAWQ Specialized Conference on Adsorption in Water Environment and Treatment Processes, Shirahama, Wakayama Japan, November, 1996.

Hand, D.W., D.R. Hokanson, and J.C. Crittenden, "Chapter 5. Air Stripping and Aeration", Water Quality and Treatment, 5^th Edition, American Water Works Association, McGraw-Hill: New York, pp. 5.1-5.68, 1999.

Hepworth, M.T. and F.N. Bender, "Recovery of Lime and Sulfur Products from Utility Coal Wastes", Proceedings of the 10th International Conference on Solid Waste Management, University of Pennsylvania and Widener University, November 13-16, 1994.

Hertz, D.W. and R.M. Patty, "Environmentally Conscious Design for Construction: a Kellogg CPAS Tool Development Project", Proceedings of the KELSAFE Conference, M.W. Kellogg, Houston, TX, September 14-15, 1995.

Hoerning, J.M., M.A. Evans, D.J. Aerts and K.W. Ragland, "Organic Emissions from Combustion of Pine, Plywood and Particleboard", 210th American Chemical Society National Meeting, Chicago, IL, pp. 676-680, August 20, 1995.

Hu, S., J.C. Crittenden, and D.W. Hand, "Development of a Kinetic Model for the H2O2/UV AOP and Model Verification", The Fourth International Conference on the Advanced Oxidation Technologies for Water and Air Remediation, Orlando, FL., September, 1997.

Huang X., J.Y. Hwang and R. Tieder, "Clean Fly Ash As Fillers In Plastics", Proceedings: 11th International Symposium on Use and Management of Coal Combustion By-Products, (CCBs), 1, pp 33-1 to 33-15, Orlando, FL, January, 1995.

Hwang J.Y., X. Huang, R. Tieder and A. Hein, "Refractory Material Produced From Beneficiated Fly Ash", Proceedings: 11th International Symposium on Use and Management of Coal Combustion By-Products (CCBs), 1, pp 32-1 to 32-13, Orlando, FL, January, 1995.

Hwang, J.Y. and X. Liu, "Beneficiation Process for Fly Ash and the Utilization of Cleaned Fly Ash for Concrete Application", Proceedings: 11th International Symposium on Use and Management of Coal Combustion By-Products (CCBs), 1, pp 11-1 to 11-16, Orlando, FL, January, 1995.

Jewel, L.J., M.J. Semmens, "Solvent Recovery Using Hollow Fiber Membranes," ASCE National Conference on Environmental Engineering, Critical Issues in Water and Wastewater, Boulder, CO, July 14, 1994.

Johnson, D., M.J. Semmens, C.J. Gantzer, "Minimizing VOC and Odor Emissions through Controlled Oxygen Dissolution," Purdue Industrial Waste Conference, May, 1994.

Johnson, D., M.J. Semmens, "The Performance of Unconfined Hollow Fiber Membranes as Pipe Flow and Mixed Flow Aerators," ASCE National Conference on Environmental Engineering, Critical Issues in Water and Wastewater, Boulder, CO, July 14, 1994.

Lee, K. and R. Gadh, "Design for Disassembly: A Destructive Approach", Proceedings of Joint Symposium on Concurrent Product and Process Engineering, International Mechanical Engineering Congress and Exposition, San Francisco, CA, November, 1995.

Lee, K. and R. Gadh, "Destructive Design for Disassembly to support DFE: A Virtual Prototyping Approach", Proceedings of International Conference on Advances in Mechanical Engineering, Banglore, India, December, 1995.

Lee, K. and R. Gadh, "Computer Aided Design-for-Disassembly: A Destructive Approach", Proceedings of International Symposium on Electronics and the Environment (IEEE), Dallas, TX, May, 1996.

Li, Y. and S. Sarkanen, "Plasticizers that Transform Alkylated Kraft Lignins into Versatile Thermoplastics", Proceedings of 10^th International Symposium Wood Pulp. Chem., I, pp. 492-495, 1999.

Liu X. and J.Y. Hwang, "Effect of Fly Ash Beneficiation Process on Quality of Processed Bottom Ash, ESP Fly Ash, Dust Collector Fly Ash, Their Mixtures, and Performance of Concrete Containing these Processed Ash Samples", Proceedings: 11th International Symposium on Use and Management of Coal Combustion By-Products (CCBs), 1, pp 12-1 to 12-16, Orlando, FL, January, 1995.

Maier, W., " Enhancement of Biofiltration for Air Purification," Proceedings 49th Annual Purdue Industrial Waste Conference, May, 1994.

Mayer, A.S., V.J. Wildfong, R.A. Voigt, "Modeling the Fate of Hazardous Compounds in Conventional Wastewater Treatment within a Waste Minimization Framework," Proceedings of Envirosoft '94, Computational Mechanics Publishers, Southampton, UK, in press, 1994.

Milacic, D., H.A. Gowaikar, W.W. Olson, and J.W. Sutherland, "A Proposed LCA Model of Environmental Effects with Markovian Decision Making", to appear in Proceedings of SAE TLC Conference, Paper No. 971174, April, 1997.

Mullins, M.E., Radecki, P.P.,and Rogers, T.N., "Engineering, Chemical Data Correlation", Kirk-Othmer Encyclopedia of Chemical Technology, Volume No. 9, 4th Edition, John Wiley and Sons, New York, 1994.

Mullins, M.E. and T.N. Rogers, "Estimation of Henry's Constants for Aqueous Systems at Elevated Temperatures", 30th Symposium on Thermophysical Properties, Boulder, CO, June, 1997.

Nesbitt, C.C., C.H. Byers, "Environmentally-benign Materials and Processes," from the Workshop on Innovation in Materials Processing and Manufacture: Exploratory Concepts for Energy Applications, Oak Ridge, TN, March, 1993.

Olson, W.W., J.B. Wang, J. Zeng, and J.W. Sutherland, "Reducing Manufacturing Impacts on the Environment with Markov Decision Making", Proceedings of the Japan - U.S.A. Symposium on Flexible Automation, pp. 191-198, July, 1998.

Olson, W.W., S.M. Pandit, J.W. Sutherland, and H. Xue, "Life Cycle Analysis Using Input- Output Analysis with Markov Decision Processes", Proceedings of the 1998 NSF Design & Manufacturing Grantees Conference, pp. 9-10, 1998.

Oman, E.J., D. Audeves, D.R. Hokanson, D.W. Hand, J.C. Crittenden, and T.N. Rogers, "Modeling and Optimization of a Catalytic Wet-Oxidation Process Used for Water Recycling Applications", Proceedings of the WEFTEC ’99, 72^nd Annual Water Environment Federation (WEF) Conference and Exposition, New Orleans, LA, October, 1999.

Patty, R.M. and D.W. Hertz, "An Industrial Constructability Design Tool: Providing Multi-Media Lessons Learned to Design Teams", ASCE Construction Congress V, Minneapolis, MN, October, 1997.

Philipps, K., S. Vadrevu, W.W. Olson and J.W. Sutherland, "Concurrent Engineering and the Environment", S. Wu Symposium, pp. 349-354, May 1994.

Radecki, P.P., "Computer-Based Methods for Finding Green Synthesis Pathways and Industrial Processes for Manufacturing Chemicals: A View From 10,000 Feet," Proceedings Document for the USEPA/ NSF Workshop on Green Syntheses and Processing in Chemical Manufacturing, Cincinnati, OH, October, 1994.

Rekoske, J.E., R.J. Madon, L.M. Aparicio and J.A. Dumesic, "Microkinetic Analysis of Isobutane Reactions Catalyzed by Y-Zeolite", 10th International Congress on Catalysis, Akademiai, Budapest, Hungary, 1653, 1993.

Rogers, T.N., A.A. Kline, and S.J. Unger, Standard Handbook for Hazardous Waste Treatment & Disposal (2nd Edition; Editor: Harry M. Freeman), "Chapter 6.2: Distillation", McGraw-Hill Book Company, accepted for publication, Summer 1997.

Rogers, T.N., M.D. Miller, A.A. Kline, M.E. Mullins, A.W. Loll, and D.M. Wieber, "Development of a Physical Property Management System for Data Delivery to Scientists and Design Engineers", 30th Symposium on Thermophysical Properties, Boulder, CO, June, 1997.

Sarkanen, S. and Y. Li, "Plasticizers that Transform Alkylated Kraft Lignins into Thermoplastics: In Biomass—A Growth Opportunity in Green Energy and Value-Added Products", Overend, R.P., Chornet, E., Eds., Elsevier Science, Oxford, England, Proceedings 4th Biomass Conference Americas, 1, pp. 533-539, 1999.

Sheng, P., D. Bauer, J.W. Sutherland, T. Cao, A. Gandhi, R.E. DeVor, and S. Skerlos, "Web-Based Cutting Fluid Evaluation Software", Proceedings of CIRP International Seminar on Manufacturing Systems, Berkeley, CA, May, 1998.

Shonnard, D.R., J. Herlevich Jr., P. Parikh, D. Stark, B. A. Barna, T.N. Rogers, T.N., D.A. Crowl, A.A. Kline, and P.P. Radecki, "Pollution Assessment Software as Chemical Industry Process Simulator Enhancements", Proceedings of the Fifth World Congress of Chemical Engineering, San Diego, CA, July, 1996.

Shonnard, D.R., J.M. Markey, and P.A. Deshpande, "Evaluation of Unit Operation-specific Emission Databases", Proceedings of the 1995 AIChE Summer National Meeting, Boston, Mass., July, 1995.

Shonnard, D.R., T.N. Rogers, B.A. Barna, D.A. Crowl, E.J. Oman, P.P. Radecki, J.A. Herlevich, Jr., and P.B. Parikh, "Integrated Assessment Methodologies and Software Tools for Process Design: Economic, Environmental, Safety, and Decision Analyses", Process Design Tools for the Environment, ed. S.K. Sikdar and M. El-Halwagi, in press, 1999.

Shyamsundar, N., T. Dani, R. Sonthi, and R. Gadh, "Shape Abstractions and Representations to Enable Internet-based Collaborative Design", Proceedings of the Japan-USA Symposium on Flexible Automation, July, 1998.

Shyamsundar, N., Z. Ashai, and R. Gadh, "Design for Disassembly Methodology for Virtual Prototypes", Design for Manufacturing Conference, ASME Design Engineering Technical Conferences, Irvine, CA, August, 1996.

Shyamsundar, N. and R. Gadh, "Selective Disassembly of Virtual Prototypes", IEEE International Conference on Systems Man and Cybernetics, Beijing, China, October, 1996.

Shyamsundar, N., H. Srinivasan, and R. Gadh, "Design for Disassembly to Support Environmentally Conscious Design", Conference on Environmentally Conscious Design and Manufacturing, Cleveland, Ohio, July, 1996.

Shyamsundar, N. and R. Gadh, "Geometric Abstractions to Support Disassembly Evaluation", 23rd ASME Design Automation Conference, Sacramento, CA, (DETC 97/DAC-3972, on CD), September, 1997.

Srinivasan, H. and R. Gadh, "Complexity Reduction in Geometric Selective Disassembly Using the Wave Propagation Abstraction", Proceedings of the International Conference on Robotics and Automation, pp. 1478-1483, Leuven, Belgium, May, 1998.

Srinivasan, H. and R. Gadh, "A Methodology to Design for Selective Disassembly", Proceedings of the International Symposium on Tools & Methods for Concurrent Engineering, pp. 321-328, Manchestor, UK, April, 1998.

Srinivasan, H. and R. Gadh, "A Non-Interfering Sequence for Virtual Disassembly in Maintenance", Proceedings of Workshop on Motion Support in Virtual Prototyping, Stanford University, May, 1999.

Srinivasan, H. and R. Gadh, "Selective Disassembly of Components with Geometric Constraints", Proceedings of ASME Design Engineering Technical Conferences, Las Vegas, NV, Paper No. DETC99/DFM-8961, September, 1999.

Srinivasan, H. and R. Gadh, "Selective Disassembly: Representation and Comparative Analysis of Wave Propagation Abstractions in Sequence Planning", Proceedings of IEEE International Symposium on Assembly and Task Planning, Porto, Portugal, Paper No. ATP/USA/17, July, 1999.

Srinivasan, H. and R. Gadh, "Virtual Selective Disassembly: A Geometric Tool to Achieve Net Positive Environmental Value", Proceedings of 30th ISATA, Florence, Italy, pp. 425-432, (Ref. no. 97EN047), June, 1997.

Srinivasan, H., N. Shyamsundar, and R. Gadh, "A Virtual Disassembly Tool to Support Environmentally Conscious Product Design", Proceedings of 1997 International Symposium on Electronics and the Environment (IEEE), San Francisco, CA, pp. 7-12, May, 1997.

Sutherland, J.W., S. Basu, and A. Gandhi, "Pollution Prevention in Machining", Proceedings of 1998 National Pollution Prevention Roundtable Conference, Cincinnati, OH, April, 1998.

Sutherland, J.W., C.M. Daniel, S. Vadrevu, and W.W. Olson, "Evaluating Reuse and Re-manufacturing Potential Using a Simple Model for Product Value", Concurrent Product Design and Environmentally Conscious Manufacturing, ASME Bound Volume - DE Vol. 89 / MED Vol. 5, pp. 263-274, November, 1997.

Sutherland, J.W., K.L. Gunter, Y. Yue, A. Gandhi, and Y.K. Siow, "The Role of Cutting Fluids in Machining: Modeling Mist Formation and Heat Transfer Effects", to appear in 1999 NSF Design and Manufacturing Grantees Conference, 1999.

Sutherland, J.W., Y. Yue, Y. Zheng, K. Gunter, and T. Cao, "Evaluation of Environmental Effects and Process Impact of Cutting Fluids", Proceedings of the 1998 NSF Design & Manufacturing Grantees Conference, pp. 369-370, 1998.

Sutherland, J.W., Y. Yue, and Y. Zheng, "Modeling Mist Formation and Heat Generation to Achieve Environmentally Conscious Machining", Proceedings of the NSF Design & Mfg. Grantees Conf., pp. 201-202, 1997.

Sutter, L.L., G.R. Dewey, and J.F. Sandell, "Characterization of Lead Bearing Phases in Municipal Waste Combustor Fly Ash", Proceedings of the Microscopy Society of America, Minneapolis, MN, August, 1996.

Sutter, L.L, P. Lehoux, and G.R. Dewey, "Phase Distribution Analysis of Portland Cement Clinker", to be presented and published in the Proceedings of the 19th International Conference on Cement Microscopy, Cincinnati, OH, April, 1997.

Sutter L.L., J.F. Sandell, and G.R. Dewey, "Applications of Electron Microprobe and Mineral Liberation Analysis Techniques to Municipal Solid Waste Combustor Fly Ash," Proceedings of the International Symposium on Extraction and Processing for the Treatment and Minimization of Wastes, San Francisco, CA, February 27 - March 3, 1994.

Vadrevu, S., J.W. Sutherland, and W.W. Olson, "A Value Model for Use in Environmentally Conscious Design and Manufacturing", published in the Proceedings of the International Mechanical Congress and Exposition, ASME, 681, pp. 93-102, November 1994.

Wentland, C.J., W.W. Olson and J.W. Sutherland, "An Environmental Advisory System for Concept Design: Creation of a Reprocessability Index System", to appear in ASME Bound Volume, 1995.

Wentland, C.J., W.W. Olson, and J.W. Sutherland, "Use of a Reprocessability Index System for the Environmental Scoring of Rotational Parts", Technical Papers of NAMRI/SME, pp. 145-150, May, 1996.

Whitmer, C.I., W.W. Olson and J.W. Sutherland, "Determination of Design Effort Distribution for an Environmentally Conscious Product Using a Pairwise Comparison Approach", to appear in ASME Bound Volume, 1995.

Whitmer, C.I., W.W. Olson and J.W. Sutherland, "Methodology for Including Environmental Concerns in Concurrent Engineering", to appear in Proceedings of First World Conference Integrated Design and Process Technology, 1995.

Wilkening, R., Evans, M., Ragland, K., and Baker, A., "Emissions From Laboratory Combustor Tests of Manufactured Wood Products", First Biomass Conference of the Americas, Burlington, VT, Sept. 1, 1993.

Yue, Y., J.W. Sutherland, and D.J. Michalek, "Cutting Fluid Mist Formation During Machining Process via Atomization", 11th Annual Conference of Liquid Atomization and Spray Systems (ILASS), pp. 329-333, 1998.

Yue, Y., J.W. Sutherland, and W.W. Olson, "Cutting Fluid Mist Formation in Machining Via Atomization Mechanisms", Proceedings of Symp. on Design for Manf. and Assembly, ASME Bound Volume - DE Vol. 89, pp. 37-46, November, 1996.

Yue, Y., Y. Zheng, S. Basu, and J.W. Sutherland, "Cutting Fluids: Performance Measures and Health Related Characteristics", Proceedings of the Japan - U.S.A. Symposium on Flexible Automation, pp. 199-208, July, 1998.

Zeltner, W.A., M.A. Anderson, "Preparation of Nanosize Oxide Particles and Their Coating onto Porous Supports," in Dispersion and Aggregation: Fundamentals and Applications, (B.M. Moudgil, P. Somasundaran, Eds.), Engineering Foundation, New York, 307, 1994.

Zhang, Y., J.C. Crittenden, D.W. Hand, D.L. Perram, "Solar Detoxification of Groundwater Using Fixed-Bed Photocatalysts," Presented at Water Environment Federation 67th Annual Conference, Chicago, IL, October 1994.

Zheng, Y., J.W. Sutherland, and W.W. Olson, "A Continuum Mechanics Model to Predict Shear Angle and Cutting Forces in Orthogonal Cutting," submitted to ASME IMECE, 1997.