CenCITT 1992-99 MAJOR PROJECT REPORTS
Adler, S., E. Beaver, P. Bryan, J.E.L. Rogers, S. Robinson, and C. Russomanno, "Vision 2020 1998 Separations Roadmap", American Institute of Chemical Engineers, New York, NY, 1998. CenCITT was one of the organizations who participated in and sponsored the preparation of this roadmap report.
Cortright, R.D., E. Bergene, P. Levin, M. Natal-Santiago, and J.A. Dumesic, "Reactions of Isobutane and Isobutylene over Silica- and L-Zeolite-Supported Pt/Sn/K Catalysts", Final Report submitted to the National Center for Clean Industrial and Treatment Technologies, October, 1995.
Dewey, G.R., J.F. Sandell, J.A. Willemin, M.L. Movrich, "Utilization of Combustion Residuals Generated by the Olmsted County Waste-to-Energy Facility", Final Report on the Use of Bottom Ash in Bituminous Mixtures submitted to Olmsted County, MN, January, 1994.
Harper, J., P. Wolfe, R. Smith, J. Baker, and J. Dawson, "Environmental Expert System for ‘Green’ Process Design", Final Report submitted to Rotorcraft Industry Technology Association, Inc., February, 1997.
Hepworth, M.T., "Recovery of Lime and Sulfur from Gypsum and Pyrite Wastes", Final Report submitted to the National Center for Clean Industrial and Treatment Technologies, June, 1995.
Herlevich, J., M. Miller, P. Parikh, A. Figueroa, D. Stark, and E. Larson, "Feasibility Survey of Cogeneration of Steam and Electricity at Michigan Technological University: An Incremental Return Comparison Based on Cost, Safety and Environmental Impact", Michigan Technological University, Houghton, MI, December, 1996.
Herlevich, J., "Air Stripper Model Comparison Results: ASPEN Versus StEPP," Unpublished report, Michigan Technological University, Houghton, Michigan, 1994.
Hoerning, J.M. and K.W. Ragland, "Comparison of the Incineration of Photographic Processing Wastes Versus Typical Municipal Wastes Using a Low Temperature Simulated Municipal Incinerator", project report to Eastman Kodak, 1994.
Kim, N. K., "Dynamic Modeling of PDMS Polymerization Reaction", submitted to CenCITT in August 1993.
Kindt, L.M., "Determination of Henry's Constants from Pressure Measurements", Department of Chemical Engineering, Michigan Technological University, June 1994.
Lee K. and R. Gadh, "Computer Aided Design-for-Disassembly: A Destructive Approach", Technical Report submitted to the University of Wisconsin-Madison, 1995.
Nesbitt, C.C. "Metal Removal by Chemical Precipitation as Insoluble Hydroxides and Sulfides", unpublished report, Michigan Technological University, Michigan, 1994.
Noguera D.R. and M.A. Drnevich, "Recovery of Valuable Polymers from Sewage Sludge", Final Report, University of Wisconsin System, Solid Waste Management and Research Program, October, 1999.
Penke, B., "Henry's Law Constant Estimation Models", Department of Chemical Engineering, Michigan Technological University, November, 1994.
Radecki, P., J. Baker, B. Barna, D. Crowl, A. Figueroa, J. Herlevich, A. Kline, P. Parikh, T. Rogers, D. Shonnard, D. Stark, D. Hertz, and R.S. Butner, "Pollution Assessment and Prevention Software for Chemical Industry Process Simulators (P2SCIPS) Annual Report", December, 1996.
Radecki, P.P. and C.R. Szydlik, "Volume 1: CenCITT Research Plan", Final Report submitted to Michigan Department of Commerce/Department of Natural Resources for Clean Technology Opportunities for a Prosperous Michigan project, February, 1994.
Radecki, P.P. and C.R. Szydlik, "Volume 2: Clean Technology Needs Surveys", Final Report submitted to Michigan Department of Commerce/Department of Natural Resources for Clean Technology Opportunities for a Prosperous Michigan project, February, 1994.
Rudd, D.F. and J.A. Dumesic, "Exploratory Research on the Cleaner Manufacture of Olefins", Final Report submitted to the National Center for Clean Industrial and Treatment Technologies (CenCITT), September, 1994.
Rudd, D.F. and A.A. Trevino, "Chemical Industry Planning System Prototype User's Guide", Shanahan Valley Associates, Inc., Madison, WI, August, 1995.
Schams J.J., "Evaluation of Henry's Law Constant and Activity Coefficient Estimation Models", Department of Chemical Engineering, Michigan Technological University, June, 1994.
Semmens, M.J., "Membrane Filtration for the Recovery of Oil from Cutting Fluids", Final Technical Report submitted to the National Center for Clean Industrial and Treatment Technologies (CenCITT), September, 1997.
Voigt, R.A. and A.S. Mayer, "Incorporation of Waste Treatment Models into Process Flowsheet Simulators", unpublished report, Michigan Technological University, Houghton, Michigan, 1994.
Voigt, R.A. and A.S. Mayer, "Modeling Metals Fate in Conventional Wastewater Treatment Plants", unpublished report, Michigan Technological University, Houghton, Michigan, 1994.
Zhang, Y., J.C. Crittenden, D.W. Hand, and D.L. Perram, "Removal and Destruction of Water Contaminants Using Advanced Oxidation Processes", Monthly Reports to Armstrong Laboratory, the U.S. Air Force (1991-1994).