NATIONAL CENTER FOR CLEAN INDUSTRIAL AND TREATMENT TECHNOLOGIES (CenCITT)

CenCITT 1992-99 RESEARCH PRESENTATIONS

Anderson, M.A., C.G. Hill, Jr., A.Ali, L. Chu, R.A. Peterson, and E.T. Webster, "Ceramic Membranes for Novel Separations", Eighth Symposium on Separation Science and Technology for Energy Applications, 1993.

Baker, J.R., B.A. Barna, J.L. Bulloch, J.C. Crittenden, D.A. Crowl, D.W. Hand (presenter), D.R. Hokanson, A.A. Kline, A.S. Mayer, J.R. Mihelcic, E.J. Oman, R.M. Patty, P.P. Radecki, T.N. Rogers, D.R. Shonnard, M.J. Semmens, D.W. Hertz, and S. Butner, "CenCITT’s Tools for Sustainability", poster presentation, United Engineering Foundation’s Clean Products and Processes II Conference, Lake Arrowhead, CA, November, 1999.

Baker, J.R. and J.C. Crittenden, "CPAS Table Top Exhibit", ACS Green Chemistry and Engineering Conference, Washington, D.C., June, 1997.

Baker, J.R., J.C. Crittenden, and E.J. Oman, "Decision-Making Tools for the Chemical Process Industry", U.S. Environmental Protection Agency Tools for Sustainability Workshop, Washington, DC, February, 1999.

Baker, J.R., "Decision Making Tools for Pollution Prevention", Chemical Manufacturers Association - Responsible Care, Delivering on the Promise, Denver, CO, April, 1997.

Baker, J.R., "Overview of the National Center for Clean Industrial and Treatment Technologies and a Collaborative Project: The Clean Process Advisory System", Michigan Industrial Exposition, April 13, 1995.

Baker, J.R. and J.T. Quigley, "The Clean Process Advisory System for Incorporating Pollution Prevention Into Design", EPA Region II Sponsored Workshop on Succeeding at Waste Minimization/Pollution Prevention, June, 1997.

Baker, J.R., "Risk Assessment and Pollution Prevention Through the Clean Process Advisory System (CPAS)", Risk Assessment Hands on Workshop, Concurrent Technologies Corporation, Johnstown, PA, May, 1996.

Baker, J.R. and T.N. Rogers, "Environmental Assessments for the Environmental Expert System", National Rotorcraft Technology Center/Rotorcraft Industry Technology Association E2S Proof-of-Concept Evaluation, Tempe, AZ, December, 1996.

Baker, J.R., "Status Report on Developments in the Clean Process Advisory System (CPAS)", National Pollution Prevention Roundtable, Information and Technology Transfer Workgroup, Berkley Springs, WV, November, 1996.

Baker, J.R., M. Zanoni, R. Hossli and P.P. Radecki, "A Demonstration Version of the Clean Process Advisory System (CPAS)", Fast-Tracking Priority Pollution Prevention, 1995 AIChE National Summer Meeting, Boston, MA, August 2, 1995.

Bjorklund, M.C. and R.W. Carr, "A Clean Chemical Process for the Conversion of Methane to Methanol", 37th Annual Regional Symposium, Biotechnology and Pollution Control, AIChE, Twin Cities Section, February, 1997.

Bjorklund, M. C., R.W. Carr, and A.V. Kruglov, "Methane to Methanol in a Simulated Countercurrent Moving Bed Chromatographic Reactor", American Institute of Chemical Engineers’ Annual Meeting, Chicago, IL, November, 1996.

Bjorklund, M.C. and R.W. Carr, "Methane Conversion in the Simulated Countercurrent Moving Bed Chromatographic Reactor", Macalester College Chemistry Seminar, March, 1997.

Bjorklund, M.C. and R.W. Carr, "The Partial Oxidation of Methane to Methanol in a Simulated Countercurrent Moving Chromatographic Reactor", AIChE Annual Meeting, Los Angeles, CA, November, 1997.

Brendley, W.H., "Environmental Technologies for Pollution Prevention, Control & Remediation", World Environmental Congress, London, Ontario, Canada, September 17-22, 1995.

Bulloch, J.L., D.W. Hand, J.C. Crittenden, D.R. Hokanson, M. Ulmer, and W. Holl, "Predicting the Performance of Liquid Phase Fixed Bed Granular Activated Carbon Adsorbers", Twenty-Third Biennial Conference on Carbon, State College, PA, July 13-18, 1997.

Bulloch, J.L., D.W. Hand, and J.C. Crittenden, "Potential Research and Development Interactions in Adsorption and Advanced Oxidation", presented to Calgon Carbon Co., Pittsburgh, PA, February, 1997.

Bulloch, J.L. "The Pollution Prevention Assessment Framework (P2 Framework): Tech Transfer from EPA to Industry", National Pollution Prevention Roundtable, Washington, DC, April, 1999.

Bulloch, J.L., "Progress on Adsorption for Recovery of Organics (AdRecover)", presented to Rohm and Haas Co., Philadelphia, PA, July, 1997.

Cameron, D.C., "Benign Biosynthesis," EPA/NSF Workshop on Green Syntheses and Processing in Chemical Manufacturing, Cincinnati, OH, July 12-13, 1994.

Cameron, D.C., A.M. Held, M.Y. Zhu and F.A. Skraly, "Microbial Conversion of Glycerol to 1,3-Propanediol and Related Compounds", Biotechnology Secretariat, Abstract No. 131, 209th American Chemical Society National Meeting, Anaheim, CA, April, 1995.

Cameron, D.C., "Metabolic Engineering of the 1,3-Propanediol Pathway", invited seminar, Eidgenossische Technische Hochschule (ETH) Zurich, Institut fur Biotechnologie, February, 1996.

Cameron, D.C., "Metabolic Engineering of the 1,3-Propanediol Pathway", invited seminar, Gesellschaft fur Biotechnologische Forschung mbH (GBF), June, 1996.

Cameron, D.C., "Metabolic Engineering of the 1,3-Propanediol Pathway", invited seminar, Universitat Stuttgart, Forschungszentrum Bioverfahrenstechnik, March, 1996.

Cameron, D.C., "Metabolic Engineering of Propanediol Pathways", invited seminar, Colorado State University, Department of Chemical and Agricultural Engineering, December, 1996.

Cameron, D.C., "Metabolic Engineering of Propanediol Pathway", invited seminar, University of Colorado, Department of Chemical Engineering, October, 1996.

Cameron, D.C., F.A. Skraly, B.L. Willard, M.Y. Zhu, A.M. Held and A.J. Shaw, "Metabolic Engineering of Three-Carbon Metabolism", Biochemical Engineering IX, Davos, Switzerland, May, 1995.

Carr, R.W., "Adsorptive Chemical Reactors", AIChE Annual Meeting, Dallas, TX, October-November, 1999.

Carr, R.W., "Adsorptive Chemical Reactors", invited presentation, NICHE Conference (sponsored by Chemical Research Council), Marco Island, FL, June, 1999.

Carr, R.W. and M.C. Bjorklund, "Dynamics of the Simulated Moving Bed Chromatographic Reactor", AIChE Annual Meeting, November, 1997.

Carr, R.W. and M.C. Bjorklund, "Methane Conversion in the Simulated Moving Bed Chromatographic Reactor", Universal Oil Products, April, 1998.

Carr, R.W. and M.C. Bjorklund, "Reaction and Separation with Adsorptive Chemical Reactors: The Simulated Moving Bed", Gordon Conference on Separation and Purification, August, 1998.

Carr, R.W., "Partial Oxidations with a Simulated Countercurrent Moving Bed Chromatographic Reactor", invited presentation, 4^th International Conference on Environmental Catalysis, Tokyo, Japan, January, 1999.

Chatkunnaayuttaya, P., T.N. Rogers, A.M. Provost, M.E. Mullins, and D.S. Hiew, "Thermodynamic Study of Dilute Organic-Water Mixtures: A Proposed Model of Henry's Law Constant at Elevated Temperatures", Session 01A17: Posters--General Papers on Thermodynamics and Transport Properties I, Paper 86J, AIChE Annual Meeting, Dallas, TX, October-November, 1999.

Chen, H., B.R. O’Donnell, E.J. Oman, A.A. Kline, D.R. Shonnard, T.N. Rogers, B.A. Barna, and D.A. Crowl, "Integrated Assessment Tools as Process Simulator Enhancements for Chemical Engineering Education", poster presentation, AIChE Annual Meeting, Dallas, TX, October-November, 1999.

Chen, Y., J.C. Crittenden, D.W. Hand, and V.H. Selzer, "Advances in TiO₂ Photocatalytic Oxidation Process", 22^nd Annual Midwest Environmental Chemistry Workshop, Houghton, MI, October, 1999.

Chu, L., W.A. Zeltner, and M.A. Anderson, "Microporous Alumino-Silicates Prepared by Sol-Gel Processing", American Ceramic society Meeting in the Symposium on Science, Technology, and Applications of Colloidal Suspensions, 1994.

Cortright, R.D. and J.A. Dumesic, "Reaction Pathway Analysis for the Reactions of Isobutane on Supported Pt and Pt/Sn Catalysts", 1996 AIChE Annual Meeting, Chicago, IL, 1996.

Cortright, R. D., B.E. Spiewak, and J.A. Dumesic, "Kinetic, Microcalorimetric, and Spectroscopic Studies of Platinum Catalysts for Reactions of Light Hydrocarbons", 15th Meeting of the North American Catalysis Society, Chicago, IL, 1997.

Cortright, R.D., R. Watwe, B.E. Spiewak, and J.A. Dumesic, "Catalytic Reaction Synthesis for Pollution Prevention: Reaction Pathways of Light Paraffins over Supported Platinum Catalysts", ACS Green Chemistry and Engineering Conference, Washington, DC, June, 1997.

Cozzens, D.A., J.W. Sutherland and W.W. Olson, "Impact of Cutting Fluids on Boring Operations", Ford Motor Company, Livonia, MI, October 1994.

Cozzens, D.A., J.W. Sutherland and W.W. Olson, presentations to Ford Motor Company, Livonia, MI, June, July, and August, 1994.

Crowl D. A., "Chemical Process Safety: The Battle between Humans, the Control System and the Process", Plenary Lecture, Instrument Society of America, Anaheim, CA, October, 1997.

Crittenden, J.C., "Applications of Life Cycle Assessment", Session Chair, United Engineering Foundation’s Clean Products and Processes II Conference, Lake Arrowhead, CA, November, 1999.

Crittenden, J.C. and J.L. Bulloch, "The Pollution Prevention Assessment Framework (P2 Framework)", 2^nd AIChE Pollution Prevention Topical Workshop, Houston, TX, March, 1999.

Crittenden, J.C., "Economic and Environmental Conscious Decision-Making Through the Use of Pollution Prevention Assessment Tools", Michigan Sustainable Business Forum, Grand Rapids, MI, July, 1999.

Crittenden, J.C., D.W. Hand, D.R. Hokanson, and J.L. Bulloch, "Predicting the Performance of Fixed-Bed Granular Activated Carbon Adsorbers", First IAWQ Specialized Conference on Adsorption in Water Environment and Treatment Processes, Shirahama, Wakayama Japan, November, 1996.

Crittenden, J.C., D.W. Hand, and V.H. Selzer, "Progress in Photocatalytic Treatment of Water & CenCITT Overview", Water Technology Center (TZW), Karlsruhe and the Department of Chemical Engineering, University of Karlsruhe, Germany, December, 1995.

Crittenden, J.C., H. Hautakangas, J.R. Mihelcic, H. Li, E.J. Oman, "Optimization and Modeling of Biofiltration for Odor Control", presented at the WEFTEC ’99, 72^nd Annual Water Environment Federation (WEF) Conference and Exposition, New Orleans, LA, October, 1999.

Crittenden, J.C., "Interactions Between the CenCITT Project on Effluent Treatment Design Option Tools and MTU's Present Project Water Treatment for the Space Station", presented at NASA Marshall Space Center, Huntsville, AL, January, 1997.

Crittenden, J.C., "Interactions Between the CenCITT Project on Photocatalysis and NASA's Needs for Air and Water Treatment", presented at NASA Johnson Space Center, Houston, TX, March, 1997.

Crittenden, J.C., "Possible Research Interactions with CenCITT in Particular Their Potential Interactions with the Effluent Treatment Design Option Tools", presented to Nishihara, Ltd., Tokyo, Japan, June, 1996.

Crittenden, J.C. and D.F. Rudd, "Pollution Prevention Research Needs and the Role of Environmental Engineers in P2", Association of Environmental Engineering Professors/National Science Foundation Research Opportunities Workshop, Ann Arbor, MI, September 21, 1993.

Crittenden, J.C., V. H. Selzer, and D.W. Hand, "Preparation of Ultrapure Water from Industrial Wastewater, Preliminary Results", Texas Instruments and the Water & Environmental Engineering Division at Texas Instruments, Dallas, Texas, February, 1996.

Crittenden, J.C., Y. Zhang, D.W. Hand and D.L. Perram, "Destruction of Organic Compounds in Water Using Fixed-bed Photocatalysts", presented at 1995 International Solar Energy Conference, Maui, Hawaii, March 19-24, 1995.

Crittenden, J. C., Y. Zhang, D.W. Hand, and D.L. Perram, "Solar Detoxification of Groundwater Using Fixed-Bed Photocatalysts", presented at ASME/JSME/JSES International Solar Energy Conference, Lahaina, Maui, Hawaii, March, 1995.

Crittenden, J.C., Y. Zhang, D.W. Hand, R.P.S. Suri, J. Liu, D.L. Perram, E.G. Klun, S. Notthakun, and M.E. Mullins, "Photocatalytic Decontamination of Water", Florida Environmental Conference, Palm Coast, FL, October 19, 1992.

Crittenden, J.C., Y. Zhang, D.W. Hand, R.P.S. Suri, J. Liu, D.L. Perram, E.G. Klun, S. Notthakun, and M.E. Mullins, "Photocatalytic Decontamination of Water", Gordon Conference, New Hampton, NH, June 13-18, 1993.

Crittenden, J.C., Y. Zhang, D.W. Hand, R.P.S. Suri, J. Liu, D.L. Perram, E.G. Klun, S. Notthakun, and M.E. Mullins, "Photocatalytic Decontamination of Water", Hazardous Waste Conference, Notre Dame, IN, August 1992.

Crittenden, J.C., Y. Zhang, D.W. Hand, R.P.S. Suri, J. Liu, D.L. Perram, E.G. Klun, S. Notthakun, and M.E. Mullins, "Photocatalytic Decontamination of Water", Michigan Environmental Technology Innovation Conference, E. Lansing, MI, September, 1992.

Crittenden, J.C., Y. Zhang, D.W. Hand, R.P.S. Suri, J. Liu, D.L. Perram, E.G. Klun, S. Notthakun, and M.E. Mullins, "Photocatalytic Decontamination of Water", Seminar, Johnson Space Center, Houston, TX, October 1992.

Crittenden, J.C., Y. Zhang, D.W. Hand, R.P.S. Suri, J. Liu, D.L. Perram, E.G. Klun, S. Notthakun, and M.E. Mullins, "Photocatalytic Decontamination of Water", USEPA Risk Reduction Engineering Laboratory Workshop on Process Simulation and Optimization with Environmental Considerations, Cincinnati, OH, December, 1992.

Cussler, E.L., T. Pennaz and J. Burban, "A VOC-Free Lithographic Printing System", Fast-Tracking Priority Pollution Prevention-II/Session 9, 1995 AIChE National Summer Meeting, Boston, MA, 1995.

Cussler, E.L., "Pollution Prevention Lithographic Ink", Green Chemistry and Engineering Conference - Implementing Vision 2020 for the Environment, Washington, DC, June, 1997.

Dewey, G. R., M.A. Kayser, and L.L. Sutter, "Characterization of Electric Utility Coal Fly Ash for Use in Portland Cement Concrete", The American Power Conference, Chicago, IL, April 15,1994.

Dewey, G. R., M.L. Movrich, and M.T. Cousino, "Municipal Solid Waste Incinerator Bottom Ash as an Aggregate Substitute in Hot-Mix Bituminous Mixtures", FHWA/EPA Symposium on Recovery and Effective Reuse of Discarded Materials and Byproducts for Construction of Highway Facilities, Denver, CO, October 19-22, 1993.

Durfee, M.H. and P.P. Radecki, "A Haystack of Needles: Problems and Strategies of Ecosystem Management of Lake Superior", International Studies Association Meeting, Chicago, IL, February 22-25, 1995.

Eisele, T.C., and S.K. Kawatra, "Dewatering of Fine Particulates from Dilute Silicone Waste Dispersions", submitted for presentation at the Second International Symposium on Metallurgical Processes for the Year 2000 and Beyond, TMS fall meeting, San Diego, CA, September 21-23, 1994.

Figueroa, A., "Boiler/Combustion Analysis", presented to Air Products and Chemicals, Inc., Michigan Technological University, Houghton, MI, February, 1997.

Figueroa, A., "Boiler/Combustion Analysis", presented to visiting faculty members of the University of Sonora and University of Chihuahua, Mexico, Michigan Technological University, Houghton, MI, December, 1996.

Freeman, H.M., "Pollution Prevention", Association of Environmental Engineering Professors Workshop, Chicago, IL, October 18, 1994.

Gadh, R., "Design for Disassembly", presented to the College of Engineering, University of Wisconsin-Madison, Madison, WI, Engineering Day, October 8, 1995.

Gulliver, J.S., B.T. Oakley, and M.J. Semmens, "A New In-Stream Aerator", Hydraulic Engineering '93, Hydraulics Division, ASCE, San Francisco, CA, July 25-30, 1993.

Haan, D.M., J.W. Sutherland and W.W. Olson, presentations to Ford Motor Company, Livonia, MI, June, July, and August, 1995.

Hand, D.W., J.C. Crittenden, J. Liu, S. Notthakun and D.L. Perram, "Destruction of Organic Pollutants Using Photoassisted Heterogeneous Catalytic Oxidation", The Advanced Oxidation Process Workshop sponsored by IWSA and AWWA held in Coral Gables, FL, April 13-14, 1992.

Hand, D.W., J.C. Crittenden, Y. Zhang, and E.G. Klun, "Photocatalytic Decontamination of Water Using Sunlight and TiO₂ Impregnated Adsorbent and Non-adsorbent Supports", presented at The First International Conference on TiO₂ Photocatalytic Purification and Treatment of Water and Air on November 8-13, 1992.

Hand, D.W., A.S. Mayer, J.R. Mihelcic, D.R. Hokanson, T.N. Rogers and J.C. Crittenden, "Development of Effluent Treatment Design Option Tools for the Clean Process Advisory System (CPAS)", Fast-Tracking Priority Pollution Prevention, 1995 AIChE National Summer Meeting, Boston, MA, August 2, 1995.

Hand, D.W., J. Yu, J.C. Crittenden, T.N. Rogers, and A.A. Kline, "Prediction of Liquid-Phase Adsorption Equilibrium from Thermodynamic Properties", American Institute of Chemical Engineers Spring National Meeting, Session #106: Thermophysical Properties for Environmental Applications (Paper 106a), New Orleans, LA, February, 1996.

Hepworth, M. T., "Recovery of Lime and Sulfur Products from Utility Coal Wastes", Conference on New Directions for the Minerals Industry, Society of Mining, Metallurgy and Petroleum Engineers, Minneapolis, MN, October 13, 1995.

Hertz, D.W. and R.M. Patty, "Multimedia Tool for Safety and Constructability", Interactive Demonstration and Alpha Test, Kelsafe conference, The M.W. Kellogg Company, Houston, TX, September, 1996.

Hertz, D.W. and R.M. Patty, "The Kellogg - MTU Constructability Design Tool: Multi-media Lessons Learned", submitted and approved for presentation, Conference on Construction, American Society of Civil Engineers, 1997.

Hertz, D.W. and P.P. Radecki, "Status Report on the Clean Process Advisory System^TM: New Process Design Tools for Environmental Sustainability," presented at 1994 AIChE Summer National Meeting, Pollution Prevention Topical Conference, Pollution Prevention Research: Collaborative Efforts Between Industry and Academia, Denver, CO, August 14-17, 1994.

Hertz, D.W., P.P. Radecki, T. Toth, J.C. Crittenden and C. Vinton, "Panel Discussion Reports from CPAS Development Teams", Fast-Tracking Priority Pollution Prevention, 1995 AIChE National Summer Meeting, Boston, MA, August 2, 1995.

Hertz, D.W. and G. Reading, "Review and Demonstration of CWRT's CPAS Process Design Tools", Fast-Tracking Priority Pollution Prevention, 1995 AIChE National Summer Meeting, Boston, MA, August 2, 1995.

Hoffman, M.L., F.A. Skraly, A.J. Shaw, and D.C. Cameron, "Metabolic Engineering of 1,3-Propanediol Production in Saccharomyces Cerevisiae", Recombinant DNA Biotechnology: Focus on Metabolic Engineering, Engineering Foundation, Danvers, Mass., October, 1996.

Hokanson, D.R., T.N. Rogers, D.W. Hand, F. Gobin, M.J. Buchkowski and M.D. Miller, "Software to Estimate Physical Properties", Envirosoft '94: Computer Techniques in Environmental Studies, San Francisco, CA, November 16-18, 1994.

Hokanson, D.R., T.N. Rogers, D.W. Hand, F. Gobin, M.D. Miller, J.C. Crittenden and J.E. Finn, "A Physical Property Resource Tool for Water Treatment Unit Operations", Universities Forum, American Water Works Association Annual Conference, Anaheim, CA, June 18-22, 1995.

Huff, B., University of Minnesota Departmental Seminar on Ultrafiltration Membrane Modeling, March, 1998.

Jewel, L.J. and M.J. Semmens, "Solvent Recovery Using Hollow Fiber Membranes", ASCE National Conference on Environmental Engineering, Critical Issues in Water and Wastewater, Boulder, CO, July 14, 1994.

Johnson, D., M.J. Semmens, and C.J. Gantzer, "Minimizing VOC and Odor Emissions through Controlled Oxygen Dissolution", Purdue Industrial Waste Conference, May, 1994.

Johnson, D., M.J. Semmens, and C.J. Gantzer, "The Performance of a Low Head Oxygenator", American Fisheries Society National Conference, Halifax, Nova Scotia, August 22-25, 1994.

Johnson, D. and M.J. Semmens, "The Performance of Unconfined Hollow Fiber Membranes as Pipe Flow and Mixed Flow Aerators", ASCE National Conference on Environmental Engineering, Critical Issues in Water and Wastewater, Boulder, CO, July 14, 1994.

Kallio, E. and M. E. Mullins, "Synthesis and Application of a Novel Zeolite Membrane Reactor", ACS Annual Meeting, Anaheim, CA, March, 1999.

Kallio, E., B. Oonkhanond, and M.E. Mullins, "Preparation of ZSM-5 Membranes on Porous Alumina via Electrophoretic Deposition", AIChE Annual Meeting, Dallas, TX, October-November, 1999.

Kawatra, S.K. and A.K. Bakshi, "Determination of Changes in Rheological Properties of Mineral Slurries", AIChE 1st International Particle Technology Forum, Denver, CO, August 17-19, 1994.

Kim, N.K. and D. Caspary, "Unit Operations Laboratory Experiments with a Total Distributed Control System", presented at the 1993 International Scientists and Engineers Conference, Seoul, Korea, July, 1993.

Kline, A.A., T.N. Rogers, A.J. Pintar, M.E. Mullins, T. Selover, and G. Thomson, "AIChE/DIPPR Projects 911 and 912: Developing a New, Reliable Source of Environmental, Safety, and Health Data", American Institute of Chemical Engineers Spring National Meeting, Session #106: Thermophysical Properties for Environmental Applications (Paper 106e), New Orleans, LA, February, 1996.

Li, Y., "Thermoplastics with Very High Kraft Lignin Contents", 7th Bio/Environmentally Degradable Polymer Society National Meeting, Cambridge, MA, August, 1998.

Liu, J., D.W. Hand, J.C. Crittenden, D.L. Perram, and D.R. Hokanson, "Destruction of Toxic Organics Using Adsorption and Photocatalytic Regeneration", Poster Session held at the Annual AWWA Conference in Vancouver, B.C., Canada, June 18-25, 1992.

Loll, A.W. and T.N. Rogers, "Estimation of High Temperature VLE Physical Properties Using a Structure-Based Group Contribution Model", accepted for presentation at the 1996 AIChE National Spring Meeting, Session Title: Thermophysical Properties for Environmental Applications, New Orleans, February 1996.

Luehrs, D.C. and T.N. Rogers, "Correlation of the Limiting Partition Coefficient of Organic Solutes Between Water and Activated Carbon with the Octanol/Water Partition Coefficient", Great Lakes Regional Meeting of the American Chemical Society, May, 1996.

Maier, W., "Process Optimization of Biofiltration for Air Purification", Accepted for presentation, Third International Symposium: In-situ and On-Site Bioreclamation, San Diego, CA.

Miller, M.D., T.N. Rogers, D.W. Hokanson, D.W. Hand, and A.A. Kline, "Development of a Physical Property Management system to Support Clean Process Designs", American Institute of Chemical Engineers Spring National Meeting, Session #106: Thermophysical Properties for Environmental Applications (Paper 106d), New Orleans, LA, February, 1996.

Mullins, M.E., "Environmental Considerations in Process Design and Simulation", Presentation contained within this workshop report prepared by Jack Eisenhauer and Shawna McQueen, EPA/DOE/AIChE Workshop, Cincinnati, OH, December 8-9, 1992.

Mullins, M.E. and T.N. Rogers, "Physical Property Data Needs in Clean Manufacturing Designs", 207th American Chemical Society National Meeting, San Diego, CA, March, 1994.

Mullins, M.E. and T.N. Rogers, "Physical Property Data Needs in Clean Manufacturing Designs", Symposium on Catalytic Reaction Engineering for Environmentally Benign Processes, ACS, San Diego, CA, April 3-8, 1994.

Nesbitt, C.C., "Environmentally-benign Materials and Processes", chaired session at Workshop for on Innovation in Materials Processing and Manufacture: Exploratory Concepts for Energy Applications," Oak Ridge, TN, June, 1993.

Nesbitt, C.C. and S. Xue, "Process Development for Recovery of Lead as Lead Monoxide from Lead-Bearing Waste", in 2nd International Symposium on Treatment and Minimization of Heavy Metal Containing Waste, 1996 TMS-AIME, Scottsdale, AZ, Oct. 1996.

Nesbitt, C.C. and S. Xue, "Recycling of Base Metals from Metal Wastes of Brass Foundries", in International Symposium on Treatment and Minimization of Heavy Metal Containing Waste, 1995 Annual Meeting of TMS-AIME, February, 1995.

Niezyniccki, G.M., M.A. Anderson, and C.G. Hill, Jr., "Separation of Gaseous Mixtures for Nanofiltration", Third International Conference on Inorganic Membranes, 1994.

Olson, W.W., "Environmentally Conscious Design and Manufacturing", Japan-USA Symposium on Flexible Automation, Kobe, Japan, July 11-18, 1994.

Olson, W.W., "Environmentally Conscious Design and Manufacturing", Korean Advanced Institute of Science and Technology, Taejon, Korea, July 8, 1994.

Olson, W.W., "Environmentally Conscious Design and Manufacturing", Yueng Nam University, Taegu, Korea, July 7, 1994.

Olson, W.W., J.W. Sutherland, S.A. Batzer, C.M. Daniel, D.M. Haan, H. Iyer, P.D. Rao, Y. Yue, and Y. Zheng, "Environmentally Conscious Machining Activities at Michigan Technological University", a day long workshop for the Ford Motor Company, Livonia, MI, February, 1996.

Olson, W.W. and J.W. Sutherland, "The Effects of Cutting Fluids on Machining Processes Performed on Aluminum", Ford Motor Company Manufacturing Engineering Forum, October 1995.

Oman, E.J., D. Audeves, D.R. Hokanson, D.W. Hand, J.C. Crittenden, and T.N. Rogers, "Modeling and Optimization of a Catalytic Wet-Oxidation Process Used for Water Recycling Applications", presented at WEFTEC ’99, 72^nd Annual Water Environment Federation (WEF) Conference and Exposition, New Orleans, LA, October, 1999.

Oman E.J. and J.C. Crittenden, "Application of Process Design Tools for Pollution Prevention", U.S. Environmental Protection Agency Tools for Sustainability Workshop, Washington, DC, February, 1999.

Oman, E.J., D.W. Hand, J.C. Crittenden, D.R. Hokanson, D.L. Carter, and C.E. Martin, "Characterization and Optimization of Three Phase Catalytic Oxidation Processes in the International Space Station (ISS) Water Processor", presented at the 29^th International Conference on Environmental Systems (ICES), Denver, CO, July 1999.

Parikh, P. and D.A. Crowl, "A Computer Implementation of the Dow Fire and Explosion and Chemical Exposure Indices and Their Application for Hazard Analysis", International Conference and Workshop on Reliability and Risk Management, San Antonio, TX, September, 1998.

Peterson, R.A., C.G. Hill, Jr., and M.A. Anderson, "Development of Ceramic Membranes for Nanofiltration", Annual Meeting, American Filtration Society, 1993.

Pletka, J. and J. Drelich, "Recovery of Waste Polymer Generated by Lost Foam Technology in the Metal Casting Industry", poster presentation, Michigan Technological University’s Graduate Student Council, Houghton, MI, October, 1999.

Pletka, J., "Recovery of Waste Polymer Generated by Lost Foam Technology in the Metal Casting Industry", seminar at General Motors Powertrain, AMDC, Saginaw, MI, August, 1999.

Qiong Z., J.C. Crittenden, D.W. Hand, J.R. Mihelcic, and D.R. Hokanson, "Environmental Indices for Green Chemical Production and Use", 22^nd Midwest Environmental Chemistry Workshop, Houghton, MI, October, 1999.

Radecki, P.P., C.R. Baillod, J.C. Crittenden, J.T. Quigley, "Development of Industry/University/ Government Collaborations by the Center for Clean Industrial and Treatment Technologies (CenCITT)", presented at 1994 AIChE Summer National Meeting, Pollution Prevention Topical Conference, Denver, CO, August 14-17, 1994.

Radecki, P.P. and J.R. Baker, "CPAS Coordination and Synergy with Other Design Tool Projects", McDonnell Douglas Corporation Component Group Meeting, Mesa, AZ, February, 1996.

Radecki, P.P., "Clean Process Advisory System Prototype Demonstration", booth presentation, National Pollution Prevention Roundtable, Washington, DC, April, 1996.

Radecki, P.P., "Computer-Based Methods for finding Green Synthesis Pathways and Industrial Processes for Manufacturing Chemicals", EPA-NSF Workshop on Green Syntheses and Processing in Chemical Manufacturing, Cincinnati, OH, July 12-13, 1994.

Radecki, P.P., "Cost Savings and Agility in R&D Through Alignment of Agendas and Program Area Funding", Fast-Tracking Priority Pollution Prevention, 1995 AIChE National Summer Meeting, Boston, MA, August 2, 1995.

Radecki, P.P., et al, "Development of CPAS^TM: A Pollution Prevention Conceptual Process Design System", ACS Meeting, San Diego, CA, March 1994.

Radecki, P.P. and R. Grote, "The Clean Process Advisory System - A Promising New Way to Navigate the Ocean of Environmental Technology Information", National Pollution Prevention Roundtable Meeting, Austin, TX, April 2-5, 1995.

Radecki, P.P., D.W. Hertz, "Pollution Prevention Verification Through the Clean Process Advisory System^TM", presented before the Division of Environmental Chemistry, American Chemical Society, Washington, D.C., August 21-25, 1994.

Radecki, P.P., "Industry-University Collaborative Projects of the Clean Process Advisory System", presented at the National Center for Manufacturing Sciences Annual Meeting, Orlando, FL, May 22-23, 1995.

Radecki, P.P., "An Introduction to Pollution Prevention-Enabling Product Design Tools", presented at the National Center for Manufacturing Sciences ECM Strategic Initiative Group, Research Triangle Park, NC, January 11, 1995.

Radecki, P.P., "Organizational Development of the Clean Process Advisory System Collaborative Program", Environmental Engineering Graduate Seminar Presentation, Michigan Technological University, February, 1996.

Radecki, P.P., "Process Design Tools: The Cutting Edge", presented at the National Institute for Standards and Technology ATP Separation Technologies Workshop, Gaithersburg, MD, February 23, 1995.

Radecki, P.P., "Proposed Integration between the Clean Process Advisory System and a National Pollution Prevention Information Network", Research and Technology Transfer Committees of the National Pollution Prevention Roundtable, Miami Beach FL, December, 1995.

Radecki, P.P., "Status Report on Clean Process Advisory System", Center for Waste Reduction Technologies Meeting, Menlo Park, CA, August, 1996.

Radecki, P.P., "Status Report on Clean Process Advisory System", Center for Waste Reduction Technologies Meeting, Miami Beach, FL, November, 1995.

Radecki, P.P., "Status Report on Clean Process Advisory System", Center for Waste Reduction Technologies Meeting, Miami Beach, FL, February, 1996.

Radecki, P.P., "Strategic Plan for the Pollution Prevention and Assessment Modules EPA Cooperative Agreement", presented at Center for Waste Reduction Technologies TTC Meeting, August 2, 1995.

Rogers, T.N., "Development of a Physical Property Management System as an Expandable Framework for Data Display and Retrieval", presented at the National Institute of Standards and Technology, Boulder, CO, July 29, 1995.

Rogers, T.N., "Development of a Pollution Assessment Module for Ranking Pollution Prevention Process Design Options", presented at the National Institute of Standards and Technology, Boulder, CO, July 29, 1995.

Rogers, T.N., D.R. Hokanson, D.W. Hand, F. Gobin, M.D. Miller, J.C. Crittenden, J.E. Finn and A.A. Kline, "Status of Developments in Physical Property Data Delivery for Pollution Prevention", Fast-Tracking Priority Pollution Prevention, 1995 AIChE National Summer Meeting, Boston, MA, August 2, 1995.

Rogers, T.N. and M.E. Mullins, "A Revised UNIFAC Parameter Set for Estimating Henry`s Law Constants, and Solubilities", 1993 Midwest Thermodynamics Symposium, Michigan Technological University, May 1993.

Rogers, T.N., "Thermodynamics of Emissions", Clean Air Acts Title 5, Air Emissions Technical Workshop, sponsored by the Alabama Chemical Association (AlaChem) and the Air and Waste Management Association, Birmingham, AL, May 25-26, 1995.

Rudd, D.F., L.M. Aparicio, J.E. Rekoske, A.A. Trevino and J.A. Dumesic, "The Microkinetics of Heterogeneous Catalysis", American Chemical Society, Washington D.C., 1993.

Sarkanen, S., "The First Alkylated 95-100% Kraft Lignin-Based Plastics", Ninth International Symposium on Wood and Pulping Chemistry, Montreal, Canada, June, 1997.

Sarkanen, S., "Plasticization of Alkylated 100% Kraft Lignin-Based Biodegradable Polymeric Materials", 217^th American Chemical Society National Meeting, Anaheim, CA, March, 1999.

Sarkanen, S., "Plasticizers that Transform Alkylated Kraft Lignins into Thermoplastics", Fourth Biomass Conference of the Americas, Oakland, CA, September, 1999.

Sarkanen, S., "Plasticizers that Transform Alkylated Kraft Lignins into Versatile Thermoplastics", invited seminar, Westvaco Corporation, Charleston, SC, September, 1999.

Sarkanen, S., "Plasticizers that Transform Alkylated Kraft Lignins into Versatile Thermoplastics", Tenth International Symposium on Wood and Pulping Chemistry, Yokohama, Japan, June, 1999.

Sarkanen, S., "Thermoplastics with Very High Lignin Contents", 215th American Chemical Society National Meeting, Dallas, TX, March, 1998.

Sarkanen, S., "Thermoplastics with Very High Kraft Lignin Contents", NCASI Central-Lake States Regional Meeting, Duluth, MN, May, 1998.

Selzer, V.H., J.L. Bulloch, and J.C. Crittenden, "The Pollution Prevention Partnership: Environmentally Conscious Decision-Making", Workshop of the Cleveland Area Manufacturing Program (CAMP), Cleveland, OH, May, 1999.

Selzer, V.H., R.A. Burns, J.C. Crittenden, D.W. Hand, L.L. Sutter, and S.R. Salman, "The Effect of Inorganic Ions on Titanium Dioxide Based Heterogeneous Photocatalysts", The Third International Conference on TiO₂ Photocatalytic Purification and Treatment of Water and Air, September, 1997.

Selzer, V.H., J.C. Crittenden, R.A. Burns, and D.W. Hand, "Development of Ultrapure Water Recirculation Systems for the Computer Chip Industry Utilizing a Fixed-Bed Heterogenous Photocatalytic Oxidation Process", World Environmental Congress, 2nd Sub-Conference on TiO₂ Photocatalysis, Cincinnati, OH, October, 1996.

Selzer, V.H., J.C. Crittenden, and S.R. Salman, "Temporal Increase in Heterogeneous Photocatalytic Oxidation Activity of a Composite TiO₂ Based Catalyst", World Environmental Congress, 2nd Sub-Conference on TiO₂ Photocatalysis, Cincinnati, OH, October, 1996.

Selzer, V.H., J.C. Graf, J.C. Crittenden, and D.W. Hand, "Gas-Phase Photocatalytic Destruction of Methane in Air for Space Applications", The Third International Conference on TiO₂ Photocatalytic Purification and Treatment of Water and Air, September, 1997.

Sever R.R. and T.W. Root, "Environmentally Benign Processing with Hydrogen Peroxide", poster presentation, University of Wisconsin-Madison Chemical Engineering Graduate Recruiting Festival, Madison, WI, February-March, 1999.

Shaw, A.J. and D.C. Cameron, "Specific Gene Deletion Technique and Applications in the Production of 1,3-Propanediol from Escherichia coli", Division of Biochemical Technology, Abstract No. 153, 211th ACS National Meeting, New Orleans, LA, March, 1996.

Shaw, A.J., F.A. Skraly, M. Zhu, M. Hoffman, and D.C. Cameron, "Metabolic Engineering of 1,3-Propanediol in Advantageous Host Organisms", Paper 158c, American Institute of Chemical Engineers Annual Meeting, Chicago, IL, November, 1996.

Shonnard, D.R. and B.A. Barna, "Pollution Prevention Education in Chemical Engineering at Michigan Technological University", DOE Pollution Prevention in the 21st Century Conference XII, Chicago, IL, July, 1996.

Shonnard, D.R., D.S. Hiew, and D.E. Stark, "Pollution Prevention by Assessing Environmental Impacts of Chemical Process Designs", American Institute of Chemical Engineers Spring National Meeting, New Orleans, LA, March, 1998.

Shonnard, D.R., T. Laurvick and A.S. Mayer, "Critical Evaluations of Pollutant Fate and Risk Models for Pollution Prevention", Fast-Tracking Priority Pollution Prevention, 1995 AIChE National Summer Meeting, Boston, MA, August 1, 1995.

Shonnard, D.R., J.M. Markey and P.A. Deshpande, "Evaluation of Unit Operation-Specific Emission Databases", Fast-Tracking Priority Pollution Prevention, 1995 AIChE National Summer Meeting, Boston, MA, August 1, 1995.

Shonnard, D.R., T.N. Rogers, B.A. Barna, D.A. Crowl, J. Herlevich, D. Stark, P. Parikh, A.A. Kline, and P.P. Radecki, "Pollution Assessment Software as Chemical Industry Process Simulator Enhancements", 5th World Congress of Chemical Engineering, Session 56: Industrial Ecology and Life Cycle Concepts, San Diego, CA, July, 1996.

Skraly, F.A., M.L. Hoffman, and D.C. Cameron, "Metabolic Engineering of 1,3-Propanediol Production from Glycerol and from Sugars", Biotechnology Secretariat, Abstract No. 36, 211th ACS National Meeting, New Orleans, LA, March, 1996.

Skraly, F.A., B.L. Willard, and D.C. Cameron, "Microbial Production of 1,3-Propanediol: Pathway Design and Analysis", Paper 36e, 1994 AIChE Annual Meeting, San Francisco, CA, November 13-18, 1994.

Suri, R.P.S., J.C. Crittenden, D.W. Hand, and M. Dziobak, "Removal and Destruction of Hazardous Organic Contaminants in Water Using Adsorption and Photocatalysis", presented at Water Environmental Federation Conference, Chicago, IL, October 1994.

Suri, R.P.S., J. Liu, D.W. Hand, J.C. Crittenden, D.L. Perram, and M. Mullins, "Heterogeneous Photocatalytic Oxidation of Hazardous Organic Contaminants in Water", presented at Water Environmental Federation Student Activities Committee in San Diego, October, 1994.

Suri, R.P.S., J. Liu, D.W. Hand, J.C. Crittenden, D.L. Perram, Y. Zhang, D.R. Hokanson, and M.E. Mullins, "Destruction of Organic Compounds in Water Employing Heterogeneous Photocatalysis", Poster Session, Gordon Research Conference, Environmental Sciences, Redox Processes in Environmental Sciences, New Hampton, NH, June 1992.

Suri, R.P.S., J. Liu, D.W. Hand, J.C. Crittenden, D.L. Perram, Y. Zhang, D.R. Hokanson, and M.E. Mullins, "Destruction of Organic Compounds in Water Employing Heterogeneous Photocatalysis", Poster Session, National AWWA Annual Conference, Vancouver, B.C., Canada, June 18-25, 1992.

Suri, R.P.S. Y. Zhang, J. C. Crittenden, D. W. Hand, and D. L. Perram, "Innovative and Clean Industrial Treatment Technologies", presented at the 1993 Michigan Water Environment Federation Annual Conference, Boyne Highlands, MI, June 1993.

Suri, R.P.S., Y. Zhang, Liu, J. C. Crittenden, D. W. Hand, D. L. Perram, "Heterogeneous Photocatalytic Oxidation of Hazardous Organic Contaminants in Water", Water Environment Federation 66th Annual Conference, Anaheim, CA, October 1993.

Sutherland, J.W., "Activities in Environmentally Conscious Design and Manufacturing at MTU", invited presentation for USCAR's (GM, Ford, Chrysler) Vehicle Recycling Partnership, Detroit, MI, September, 1995.

Sutherland, J.W., "Characterizing the Role of Cutting Fluids in Machining Processes", invited presentation at the SME - Advances in Metal Working Fluids Workshop, Fort Mitchell, KY, April, 1997.

Sutherland, J.W., "Development of an Internet-Based Cutting Fluid Evaluation Software Testbed", invited presentation at the SME - Metalworking Fluids Workshop, Troy, MI, June, 1996.

Sutherland, J.W., "Environmentally Conscious Machining: Recent Developments Relating to Cutting Fluids and Dry Machining", invited presentation at Cooper Industries (Crouse-Hinds), Syracuse, NY, June, 1997.

Sutherland, J.W., "Environmental Issues Associated with Machining Processes", First Euroconference and U.S. Workshop on Material Instabilities in Deformation and Fracture, Porto Carras, Greece, September, 1996.

Sutherland, J.W., "MT-AMRI and MTU Programs in Environmentally Conscious Machining", Dry Machining of Aluminum Team Meeting, National Center for Manufacturing Sciences, December, 1995.

Sutherland, J.W., "MT-AMRI Workshop on Environmentally Conscious Machining", Ford QMP Facility, Dearborn, MI, September 19, 1997.

Sutherland, J.W., "MT-AMRI Workshop on Environmentally Conscious Machining", Ford Scientific Research Laboratories, Dearborn, MI, May, 1996.

Sutherland, J.W., "An Overview of Environmentally Conscious Machining at Michigan Technological University", presented to the Ford Motor Company, Livonia, MI, March, 1997.

Sutherland, J.W., "Overview of the Programs and Activities of the Machine Tool Agile Manufacturing Research Institute", invited presentation at the DARPA/NSF Agile Manufacturing Initiative Principal Investigators Meeting, Alexandria, VA, September 23, 1997.

Sutherland, J.W., "Programmatic Activities in Manufacturing at MTU", seminar at Norton Company, Worchester, MA, July 31, 1995.

Sutherland, J.W., "Questioning the Traditional Role of Cutting Fluids in Machining", presented at the SME Advances in Metalworking Fluids Workshop, Fort Mitchell, KY, March 29, 1995.

Sutherland, J.W., "Research on Environmentally Conscious Machining-Dry Machining", presented to GM, Pontiac, MI, February, 1997.

Sutherland, J.W., "The Role of Cutting Fluids in Machining Process Performance", presented to Monsanto Chemical Company, Urbana, IL, February, 1997.

Toth, T.J. and B.A. Barna, "Application of the Design Option Ranking Tool Software for the Environmental and Economic Optimization of a Refinery Light Ends Utility System", AIChE Spring National Meeting, New Orleans, LA, February, 1996.

Toth, T. and B.A. Barna, "Development of a Design Option Ranking Tool", 1995 AIChE National Spring Meeting, Houston, TX, March 21, 1995.

Toth, T.J. and B.A. Barna, "Process Optimization with Environmental Constraints: The Design Option Ranking Tool", AIChE Spring National Meeting, New Orleans, LA, February, 1996.

Toth, T., "Desarrollo de un Paquete de Compota para la Evaluacion de Diseno Deplantas y de Algoros Aspetos Ambientales", Division de Ingenieria Universidad de Sonora, Hermosillo, Mexico, March 17, 1995.

Velazquez-Carillo, M., J.R. Mihelcic (presenter), and J.C. Crittenden, "Use of Material Selection Target Plots for Screening Chemicals based on Environmental and Health Properties", poster presentation, United Engineering Foundation’s Clean Products and Processes II Conference, Lake Arrowhead, CA, November, 1999.

VanderVelde, G., "Overview of CenCITT Programs and Collaboration", National Center for Manufacturing Sciences National Meeting, Orlando, FL, May 22-23, 1995.

Voigt, R.A., A.S. Mayer and V.J. Wildfong, "Modeling the Fate of Hazardous Compounds in Conventional Wastewater Treatment within a Waste Minimization Framework", Envirosoft 94: Computer Techniques in Environmental Studies, San Francisco, CA, November 17, 1994.

Webster, E.T., M.A. Anderson, C.G. Hill, Jr., "Formation of defects in Ceramic Membranes Related to Conditions Employed During Fabrication", Third International Conference on Inorganic Membranes, 1994.

Webster, E.T., C.G. Hill, Jr., M.A. Anderson, "A New Sol-Gel Process for Fabrication of Supported Ceramic Membranes", AIChE meeting, 1993.

Whitmer, C.I., W.W. Olson, J.W. Sutherland and B. Rahali, "Special Report to Whirlpool Corporation", Whirlpool Corporation, July 19, 1994.

Wildman, D.L., R.A. Peterson, M.A. Anderson, and C.G. Hill, Jr., "Investigation of Titania Membranes for Nanofiltration", Third International Conference on Inorganic Membranes, 1994.

Yaluris, G., R. J. Madon, L. M. Aparicio and J. A. Dumesic, "Microkinetic Analyses of Isoparaffin Reactions on Y-zeolites", 13th North American Meeting of the Catalysis Society, Pittsburgh, May 1993.

Yaluris, G., R.J. Madon, D.F. Rudd, and J.A. Dumesic, "Catalytic Cycles and Selectivity of Hydrocarbon Cracking on Y-zeolite-based Catalysts", Presented at the Symposium on Catalytic Reaction Engineering for Environmentally Benign Processes at the San Diego ACS Meeting, March 13-18, 1994.

Yaluris, G., R.J. Madon, D.F. Rudd, and J.A. Dumesic, "Catalytic Cycles and Selectivity of Hydrocarbon Cracking on Y-zeolite-based Catalysts", Presented at the Symposium on Catalytic Reaction Engineering for Environmentally Benign Processes, ACS, San Diego, CA, April 3-8, 1994.

Yang, Ji, E.J. Oman, D.W. Hand, D.R. Hokanson, and J.C. Crittenden (presenter), "Mathematical Modeling of Isothermal-Three Phase Separative Reactor Systems", poster presentation, United Engineering Foundation’s Clean Products and Processes II Conference, Lake Arrowhead, CA, November, 1999.

Yu, J., J.C. Crittenden, T.N. Rogers, A.A. Kline, and D.W. Hand, "Prediction of Liquid-Phase Adsorption Equilibrium from Thermodynamic Properties", American Institute of Chemical Engineers Spring National Meeting, Session 106, 25 - 26 February, New Orleans, LA, 1996.

Zeltner, W., M.A. Anderson, and R. Peterson, "Synthesis and Characterization of Nanoparticle Alumino-silicate Materials in Their Use in Gas Phase Separations, and Fabrication of a Ceramic Membrane Module for Gas Phase Separations", American Ceramic Society, Indianapolis, IN, April 25-27.

Zhang, Q., J.C. Crittenden, D.W. Hand, J.R. Mihelcic, and D.R. Hokanson, "Environmental Indices for Green Chemical Production and Use", 22^nd Annual Midwest Environmental Chemistry Workshop, Houghton, MI, October, 1999.

Zhang, Q., J.C. Crittenden, D.W. Hand, J.R. Mihelcic, and D.R. Hokanson (presenter), "Environmental Indices for Green Chemical Production and Use", poster presentation, United Engineering Foundation’s Clean Products and Processes II Conference, Lake Arrowhead, CA, November, 1999.

Zhang, Y., J.C. Crittenden, D.W. Hand, D.L. Perram, and E.G. Marchand, "Solar Detoxification of Groundwater Using Fixed-Bed Photocatalysts", presented at Water Environmental Federation 67th Annual Conference, Chicago, IL, October 1994.

Zhang, Y., J.C. Crittenden, D.W. Hand, and D.L. Perram, "Solar Detoxification of Groundwater Using Continuous Flow Reactor Packed with Supported Photocatalysts", Presented at 1994 Annual AIChE Meeting, San Francisco, CA, November 13-18, 1994.

Zhang, Y., J.C. Crittenden, D.W. Hand, and D.L. Perram, "Solar Decontamination of Water with TiO₂ Photocatalyst on Silica Based Supports", Presented at: American Water Works Association Annual Conference, San Antonio, TX, June 1993.