CenCITT 1992-99 TECHNOLOGY TRANSFER MEETINGS AND PRESENTATIONS
Allegier, Peter, Diplome Arbeit, University of Karlsruhe, Karlsruhe, Germany, Chemistry Department, Visiting Scholar, Michigan Technological University, Summer and Fall 1997.
Anderson, M.A., J.C. Crittenden, and P.P. Radecki, DuPont/CenCITT Research Collaboration Identification Conference, Wilmington, DE, June, 1993.
Auer, M.T., International Symposium on Understanding Lake Superior through Research: Status and Prospects (Poster Session), Duluth, MN, November, 1992.
Baillod, C.R. and S.K. Kawatra, American Iron and Steel Institute Waste Recycle Technology Task Force, Pittsburgh, PA, June, 1992.
Baillod, C.R., Universities Council on Water Resources Annual Meeting, Charlottesville, VA, July, 1992.
Baillod, C.R., American Foundrymen's Society Environmental Affairs Conference, Dearborn, MI, August, 1992.
Baillod, C.R. and N.J. Hutzler, Wisconsin Electric Power, research needs discussion, February, 1994.
Baillod, C.R. and P.P Radecki, introduction of CenCITT research programs to John R. Wyma, Legislative Director for Bart Stupak (US Representative from Michigan's 1st Congressional District) on February, 1994.
Baillod, C.R. and P.P. Radecki, "Educating Engineers for the Environment: Focus on Clean Product and Process Design", manuscript for Environmental Engineering Conference, POSTECH University, Pohang, South Korea, June, 1996.
Baker, J.R., P.P. Radecki, T.J. Toth, D.W. Hertz, C. Vinton, and B.A. Barna, "Clean Process Advisory System", booth display and software demonstrations, Co-sponsored with CWRT and NCMS, AIChE 1995 Spring National Meeting and PetroExpo, Houston, TX, March, 1995.
Baker, J.R. and Radecki, P.P., "Clean Process Advisory System", booth display and software demonstrations, Co-sponsored with CWRT and NCMS National Center for Manufacturing Sciences National Meeting, Orlando, FL, May, 1995.
Baker, J.R., T.N. Rogers, and P.P. Radecki, "Coordination Between CenCITT Research Programs and MDHS Environmental Expert System Project", Arizona State University and McDonnell Douglas Helicopter Systems, Houghton, MI, May, 1996.
Baker, J.R., workgroup participant, "Research and Technology Transfer Workgroup and Information Workgroup", National Pollution Prevention Roundtable, Annual Conference, Denver, CO, April, 1997.
Baker, J.R., workgroup participant, "The Role of Simulation and Modeling in Environmental Management", U.S. Department of Energy, Albuquerque, NM, September, 1997.
Baker, J.R., "Chemical Industry Compliance Assistance Center, Center Introduction and Collaborative Opportunities Discussion", Association of Small Business Development Centers Fall Confernce, Keystone, CO, October, 1997.
Baker, J.R., "Pollution Prevention in Design Through the Clean Process Advisory System", CAREline - The International Responsible Care Newsletter, October, 1997.
Baker, J.R., workgroup participant, "Research and Technology Transfer", National Pollution Prevention Roundtable, Lake Tahoe, CA, November, 1997.
Baker, J.R., Pollution Prevention Technical Assistance Group Meeting, Michigan Department of Environmental Quality, Lansing, MI, January, 1998.
Baker, J.R., Sustainability of Manufacturing Extension and Pollution Prevention Outreach, Project Scoping Meeting with Northern Initiatives Corporation, Houghton, MI, March, 1998.
Baker, J.R. and R.S. Butner, Focus Group on Needs and Perspectives of Corporations for Complying with Environmental Regulations, AIChE Spring National Meeting, New Orleans, LA, March, 1998.
Baker, J.R., "ChemAlliance - A Compliance Assistance Center for the Chemical Industry", National Pollution Prevention Roundtable Spring National Meeting, Cincinnati, OH, April, 1998.
Baker, J.R., "Environmental Protection in Manufacturing", Dickinson County Zonta International, Iron Mountain, MI, April, 1998.
Baker, J.R., "EPAS, A Product Design System for Informed Manufacturing Decisions", Environmental Engineering Seminar, Michigan Technological University, Houghton, MI, April, 1998.
Baker, J.R., workgroup participant, "Research and Technology Transfer", National Pollution Prevention Roundtable, Cincinnati, OH, May, 1998.
Baker, J.R., Pollution Prevention and the National Center for Clean Industrial and Treatment Technologies, Presentation to Diplomatic Representatives of Argentina, Houghton MI, September, 1998.
Baker, J.R. and P.P. Radecki, "Tools and Concepts for Integrating Environmental Considerations Into Product and Process Design Decisions", NATO Advanced Research Workshop on Tools and Methods for Pollution Prevention, Prague, Czech Republic, October, 1998.
Barna, B.A., "An Economic Evaluation Tool for Use in the Pollution Prevention Conceptual Process Design Simulator," AIChE-CWRT CPAS Meeting, Houston, TX, February, 1994.
Barna, B.A. and P.P. Radecki, "Collaborative Opportunities with CenCITT", presented to Division de Ingenieria Universidad de Sonora representatives, Houghton, MI, November, 1994.
Bulloch, J.L., Workshop Coordinator, Pollution Prevention Assessment Framework Workshop, Chicago, IL, August, 1998.
Bulloch, J.L., presentation and collaborative project discussions, Equilon, Shell Westhollow Technology Center, Houston, TX, August, 1998.
Bulloch, J.L., presentation and collaborative project discussions, Shell Chemical Company, Houston, TX, August, 1998.
Bulloch, J.L., presentation and collaborative project discussions, BASF Corporation, Northline, MI, October, 1998.
Bulloch, J.L., presentation and collaborative project discussions, Dow Chemical Company, Midland, MI, October, 1998.
Bulloch, J.L., presentation and collaborative project discussions, General Motors Corporation, Warren, MI, October, 1998.
Cameron, D.C. and P.P. Radecki, EPA Workshop on Green Synthesis and Processing in Chemical Manufacturing, Cincinnati, OH, July, 1994.
Cameron, D.C., Session Chair - Biosynthesis, Green Chemistry and Engineering Conference - Implementing Vision 2020 for the Environment, Washington, DC, June, 1997.
Crittenden, J.C., University of Notre Dame Hazardous Waste Conference, Notre Dame, IN, August, 1992.
Crittenden, J.C., Michigan Environmental Technology Innovation Conference, E. Lansing, MI, September, 1992.
Crittenden, J.C., Florida Environmental Chemistry Conference, Palm Coast, FL, October, 1992.
Crittenden, J.C., Seminar-Johnson Space Center, Houston, TX, October, 1992.
Crittenden, J.C., M.E. Mullins, and D.F. Rudd, USEPA Risk Reduction Engineering Lab Workshop on Process Simulation and Optimization with Environmental Considerations, Cincinnati, OH, December, 1992.
Crittenden, J.C. and P.P. Radecki, Design for the Environment Infrastructure Planning Meeting, Massachusetts Institute of Technology, Boston, MA, March, 1993.
Crittenden, J.C., University of Michigan Transportation Research Institute / MDOT / MTU Funding Opportunities Meeting, Houghton, MI, July, 1993.
Crittenden, J.C., D.F. Rudd, C.R. Baillod, A.S. Mayer, and P.P. Radecki, Fourth Association of Environmental Engineering Professors Research Conference (in relation to ongoing research with CenCITT), Ann Arbor, MI, September, 1993.
Crittenden, J.C. and P.P. Radecki, National Center for Manufacturing Sciences research collaboration discussion, Ann Arbor, MI, September, 1993.
Crittenden, J.C. and P.P. Radecki, Seminar at EPA Risk Reduction Engineering Laboratory, October, 1993.
Crittenden, J.C., American Energy Technology Company in Green Cove Springs, FL, April, 1994.
Crittenden, J.C. and D.W. Hand, at Rohm and Haas to discuss the steam regeneration work, May, 1994.
Crittenden, J.C., D.W. Hand, P.P. Radecki, D.R. Hokanson, and F. Gobin, Meeting with Eiji Nishihara (Nishihara Corp), and Takashi Asano (UC-Davis), at MTU for CenCITT introduction, photocatalytic research discussion, and CPAS (Clean Process Advisory System), August, 1994.
Crittenden, J.C. and P.P. Radecki, "CenCITT Overview", presentation to new EPA Project Officer Gregory Ondich and Stephen Lingle, Washington, DC, July, 1995.
Crittenden, J.C., and P.P. Radecki, "Overview of CenCITT Program", 3M Corporation Environmental Affairs and Safety Managers Meeting, Minneapolis, MN, February, 1996.
Crittenden, J.C., "CenCITT Research Program Overview", National Energy Renewable Laboratory, Golden, CO, April, 1996.
Crittenden, J.C., P.P. Radecki, and J.R. Baker, "CenCITT Overview" with Wolfgang Hoell of the Institute for Water Chemistry and Geotechnology, and Markus Ulmer of the Water Technology Center (TZW), Karlsruhe and the Department of Chemical Engineering, University of Karlsruhe (Germany),Houghton, MI, May, 1996.
Crittenden, J.C., "The Activities of the Center for Clean Industrial and Treatment Technologies", Department of Urban Engineering, The University of Tokyo, Tokyo, Japan, June, 1996.
Crittenden, J.C. and D.W. Hand, "Potential Research and Development Interactions with CenCITT", Calgon Carbon, Solar Chem, Peroxidation Systems, Pittsburgh, PA, October 1996.
Crittenden, J.C., participated in session development, "Adsorption in Water Environment and Treatment Processes", IAWQ, Shirahama, Wakayama, Japan, November, 1996.
Crittenden, J.C., collaborative opportunities discussion, NASA Marshall Space Center, Huntsville, AL January, 1997.
Crittenden, J.C., P.P. Radecki, J.R. Baker, M.E. Mullins, T.N. Rogers, B.A. Barna, and G. Caneba, "Possible Interactions between CenCITT Research Programs and Air Products and Chemicals Inc.", Michigan Technological University, Houghton, MI, February, 1997.
Crittenden, J.C., collaborative opportunities discussion, NASA Johnson Space Center, Houston, TX, March, 1997.
Crittenden, J.C., Overview of CPAS Design Tools in Beta Release, Distribution of CPAS Design Tools to CWRT Members, Planning Meeting for the CWRT Separation Technologies and Separative Reactors Monograph and Conference, Center for Waste Reduction Technologies (AIChE), Semi-annual Meeting, Houston, TX, March, 1997.
Crittenden, J.C., D.W. Hand, J.R. Baker, and P.P. Radecki, discussion of potential collaborative projects in software development with OLI Systems, Inc., Houghton, MI, March, 1997.
Crittenden, J.C., Session Chair - Chemical Processing & Modeling, Green Chemistry and Engineering Conference - Implementing Vision 2020 for the Environment, Washington, DC, June, 1997.
Crittenden, J.C., Panel Member - Synthesis and Processing Environmental Priorities for Vision 2020, Green Chemistry and Engineering Conference: Implementing Vision 2020 for the Environment, Washington, D.C., June, 1997.
Crittenden, J.C., workshop participant "EPA's Pollution Prevention Assessment Framework", U.S. EPA, Santa Clara, CA, October, 1997.
Crittenden, J.C., collaborative discussions with Professor Eckhard Worch, Director of Institute of Water Chemistry and Technology, Chair of Hydrochemistry Department, Technische Universitat Dresden, Houghton, MI, October, 1997.
Crittenden, J.C. and J.R. Baker, "CenCITT Initiatives in P2 Assessment and Risk Assessment", USEPA Office of Pollution Prevention and Toxics, Washington DC, December, 1997.
Crittenden, J.C., panelist and roadmapping group member, National Workshop on Process Waste Reduction via Separation Technologies and Separative Reactors, New Orleans, LA, February, 1998.
Crittenden, J.C., "CenCITT Initiatives in Clean Reaction Technologies", collaborative opportunities discussion, Lynntech, College Station, TX, March, 1998.
Crittenden, J.C., "CenCITT Activities Update", presentation to Environmental Science & Technology Advisory Board, Chapel Hill, NC, May, 1998.
Crittenden, J.C., "CenCITT Initiatives in Clean Reaction Technologies", collaborative opportunities discussion, Amway Corporation, Grand Rapids, MI, June, 1998.
Crittenden, J.C., "CenCITT Initiatives in Clean Reaction Technologies", collaborative opportunities discussion, Trojan Technologies, London, Ontario, August, 1998.
Crittenden, J.C., "CenCITT Initiatives in Clean Reaction Technologies", collaborative opportunities discussion, UVDI, Los Angeles, CA, August, 1998.
Crittenden, J.C., Presentation on CenCITT Research, Pollution Prevention Assessment Framework Workshop, Chicago, IL, August, 1998.
Crittenden, J.C., presentation and collaborative project discussions, U.S. EPA National Risk Management Research Laboratory, Cincinnati, OH, December, 1998.
Crittenden, J.C. and J.L. Bulloch, presentation and collaborative project discussions, Amway Corporation, Grand Rapids, MI, February, 1999.
Crittenden, J.C., presentation and collaborative project discussions, Abbott Laboratories, Chicago, IL, April, 1999.
Crittenden, J.C., presentation and collaborative project discussions, Stephan Company, Chicago, IL, April, 1999.
Crittenden, J.C., presentation and collaborative project discussions, Dell Engineering, Grand Rapids, MI, July, 1999.
Crittenden, J.C., presentation and collaborative project discussions, National Council for Air and Stream Improvement, Kalamazoo, MI, July, 1999.
Freeman, H.M., C.R. Baillod and P.L. Bishop, presentations and participation at Association of Environmental Engineering Professors Workshop, Chicago, IL, October, 1994.
Gadh, R., organized workshop for potential industrial collaborators, attended by companies such as TI, Raytheon, GE, Ford, and CMI, July, 1997.
Gadh, R., industry seminars presented at various companies: Pratt and Whitney, Ford Motor Company, Chrysler Technical Center, ALCOA Technical Center, CMI International - Technical Center, IBM Research Labs, and Lucent Technologies, 1998.
Gadh, R., organized workshop for potential industrial collaborators, attended by companies such as Pratt & Whitney, Boeing, Ford, Caterpillar, and CMI, June, 1998.
Gadh, R., UW laboratory tour and collaborative project discussions, Chrysler Corporation, Madison, WI, October, 1998.
Gadh, R., demonstration of Design for Disassembly (DFD) software and collaborative project discussions, Pratt & Whitney, Florida, 1999.
Gadh, R., demonstration of Design for Disassembly (DFD) software and collaborative project discussions, United Technologies Engineering Coordinate Activities, Connecticut, 1999.
Gadh, R., demonstration of Design for Disassembly (DFD) software at Stanford University workshop on Virtual Prototyping, attended by companies such as Boeing, General Motors, and General Electric, 1999.
Gadh, R., industry seminars presented at various companies: United Technologies, Unigraphics Solutions, Ford Motor Company, Hayes & Lemmerz, Boeing, IBM Research Laboratories, and Lucent Technologies, 1999.
Gadh, R., organized I-CARVE workshop for potential industrial collaborators, attended by companies such as Pratt & Whitney, Boeing, Ford Motor Company, General Motors, Caterpillar, Hayes & Lemmerz, Detroit, MI, July, 1999.
Hand, D.W., J.C. Crittenden, and P.P. Radecki, EPA-RREL research symposium and panel discussion, Cincinnati, OH, March, 1994.
Hertz, D.W. and P.P. Radecki, "Overview of CenCITT University/Industry Cooperative Projects", Office of Industrial Technologies Industrial Waste Program of the Department of Energy, Washington, D.C.. June, 1994.
Hertz, D.W., "Overview of Clean Process Advisory System", National Institute for Standards and Technology, Gaithersburg, MD, October, 1994.
Hertz, D.W. and P.P. Radecki, "Research Progress Update on CWRT/CenCITT Collaborative Projects in the Clean Process Advisory System, Emerging Separation Technologies and Separative Reactors for Industry Pollution Prevention and Pollution Prevention and Assessment Software for Chemical Industry Process Simulators", Center for Waste Reduction Technologies meeting, Richland, WA, July, 1997.
Hutzler, N.J. and G. Dewey, Fort Howard Paper Company Research Needs Meeting, Green Bay, WI, March, 1993.
Hwang, J.Y., R.E. Tieder, J.C. Crittenden, and P.P. Radecki, "Development of a Collaboration in Environmental Systems Engineering", presented to representatives of the TI Group, Inc., Houghton, MI, December, 1994.
Hwang, J.Y., R.E. Tieder, and P.P. Radecki, "Environmental Systems Engineering Center Working Meeting", participants in meeting to develop a multi-university, multi-industry center hosted by the TI group, Washington, DC, February, 1995.
Mullins, M.E. and P.P. Radecki, press conference on data and design tool needs for development of green synthesis pathways, ACS, San Diego, CA, April, 1994.
Nesbitt, C.C., ORNL Advanced Energy Projects Workshop on Innovation in Materials Processing and Manufacture: Exploratory Concepts for Energy Applications, Oak Ridge, TN, March, 11, 1993. Radecki, P.P., American Institute of Chemical Engineers Summer National Meeting, Minneapolis, MN, August, 1992.
Quigley, J.T. and R.E. Tieder, presentations at Great Lakes Pollution Prevention Roundtable Meeting, Sarnia, Ontario, Canada, August, 1995.
Radecki, P.P., Gearing Up Technology Transfer Event (Booth), Saginaw, MI, August, 1992.
Radecki, P.P., Pollution Prevention in the Pulp and Paper Industry: International Symposium, Washington, D.C., August, 1992.
Radecki, P.P. (coord), CenCITT/Kohler Project Identification Workshop, Houghton, MI, November, 1992.
Radecki, P.P. (coord), Kohler Followup Plant Tour, Kohler, WI, January, 1993.
Radecki, P.P., Solvent Pulping Symposium, Technical Association of the Pulp and Paper Industry, February, 1993.
Radecki, P.P., ARPA Technology Reinvestment Project Unveiling, Detroit, MI, March, 1993.
Radecki, P.P. CenCITT Overview for USDOE Office of Technology Development Program Support Director (METAC Meeting), Ann Arbor, MI, April, 1993.
Radecki, P.P., White House Technology Reinvestment Project Briefing, April 1993.
Radecki, P.P., T. Co, N.K. Kim, D. Hubbard, and B.A. Barna, CenCITT Overview at MTU Chemical Engineering Department Process Simulation and Control Center Industrial Advisory Board Meeting, Houghton, MI, May, 1993.
Radecki, P.P., USEPA Workshop on Identifying a Framework for the Future of Human Health and Environmental Risk Ranking, Washington, D.C., June, 1993.
Radecki, P.P., T.N. Rogers, and M.E. Mullins, Data Interfacing Needs at AIChE-DIPPR Project 911/912 Mid-Year Meeting, Houghton, MI, July, 1993.
Radecki, P.P. Research Needs Workshop for Identifying Economic Instruments to Promote Zero Discharge in the Lake Superior Basin, Houghton, MI, November, 1993.
Radecki, P.P. and C.R. Szydlik, "QA/QC from Proposal to Publication" graduate student seminar, also Michigan Clean Technology Needs Survey Results presentation to CenCITT researchers, University of Minnesota (November 1993); University of Wisconsin (December 1993); Michigan Technological University (November/December 1993).
Radecki, P.P, Michigan Industries Clean Technologies Discussions, MERRA State Environmental Roundtable, Ann Arbor, MI, December, 1993.
Radecki, P.P., "CPAS System Planning and CenCITT Overview", AIChE-CWRT CPAS Meeting (represented were The M.W. Kellogg Company, CH2M Hill, Bechtel, ENSR, Dow Chemical, AEA Technologies and Electric Power Research Institute), Houston, TX, February, 1994.
Radecki, P.P. CenCITT research programs presented to the National Center for Manufacturing Science's Environmentally Conscious Manufacturing's Strategic Initiative Group meeting, Dearborn, MI, March, 1994.
Radecki, P.P. and M.H. Durfee, presentation on development of a multi-university Cooperative Outreach for Lake Economy and Technology Studies and a Modeling Group for Lake Superior, Binational Forum Meeting, Duluth, MN, March, 1994.
Radecki, P.P, "Introduction to CenCITT", Center for Waste Reduction Technologies Technology Transfer Committee Meeting, Atlanta, GA, April, 1994.
Radecki, P.P. and D.W. Hertz, "Overview of CenCITT University/Industry Sustainable Development-Related Projects", Senior Policy Advisory to the U.S. Secretary of Commerce, Washington, D.C., June, 1994.
Radecki, P.P., "Status Report on CenCITT CPAS Activities", Center for Waste Reduction Technologies Technology Transfer Committee Meeting, Denver, CO, August, 1994.
Radecki, P.P., "Development of Industry/University/Government Collaborations by the Center for Clean Industrial and Treatment Technologies (CenCITT)", Presented at 1994 AIChE Summer National Meeting, Pollution Prevention Topical Conference, Denver, CO, August, 1994.
Radecki, P.P., "CenCITT Overview", presented to Westinghouse Corporation representatives, Houghton, MI, October, 1994.
Radecki, P.P. and J.C. Crittenden, "CenCITT Overview", presented to Louis Thibedeaux, Director of Hazardous Substance Research Center, Louisiana State University, Houghton, MI, November, 1994.
Radecki, P.P., "Collaboration Opportunities between CenCITT and OIT", presented to U.S. Department of Energy Office of Industrial Technologies representatives, Washington, DC, February, 1995.
Radecki, P.P., J.C. Crittenden, T.N. Rogers, and D.W. Hertz, "Opportunities for Coordination between CPAS, PDXI and Physical Property Management Systems", presented at a working meeting sponsored by National Institute for Standards and Technology, Gaithersburg, MD, February, 1995.
Radecki, P.P., "Environmental Systems Engineering Center Working Meeting Planning Session", meeting with TI Group representatives to plan working meeting (see Hwang, 1995), February, 1995.
Radecki, P.P., "Overview of CPAS Activities at CenCITT", presented at the Center for Waste Reduction Technologies TTC Meeting, March, 1995.
Radecki, P.P., "CenCITT's Program and Approach to Collaboration", presented to Thomas Baldini, U.S. Chair of International Joint Commission, Houghton, MI, April, 1995.
Radecki, P.P., "Opportunities for NIST Data Resources to be Utilized in CPAS", presented to National Institute for Standards and Technology, Gaithersburg, MD, April, 1995.
Radecki, P.P., "Potential Coordination Between CPAS and the NPPR Proposed National Pollution Prevention Information Network", presented to National Pollution Prevention Roundtable Executive Director, Washington, DC, April, 1995.
Radecki, P.P., D.W. Hertz and C. Vinton, "Clean Process Advisory System", booth display and software demonstrations, CoSponsored with CWRT and NCMS, Department of Energy Office of Industrial Technology 1st International Symposium on Energy Efficiency and Waste Minimization, Washington, DC, April/May, 1995.
Radecki, P.P., "Exploratory Discussions of Physical Property Management Systems", presented to representatives of Simulation Sciences, Inc. and The M.W. Kellogg Company, Houghton, MI, June, 1995.
Radecki, P.P., J.C. Crittenden and T.N. Rogers, "First Meeting of the Pollution Prevention Process Simulation Work Group", U.S. Environmental Protection Agency, Cincinnati, OH, September, 1995.
Radecki, P.P. and D.L. Stoh, "CenCITT Programs and Collaboration", poster presentation, ACS Corporate Affiliates 7th Annual Hazardous Waste Minimization Conference, Atlanta, GA, September, 1995.
Radecki, P.P., R&D and Cooperative Program opportunities discussion with Universidade Federal de Minas Gerais (Brazilian University), Houghton, MI, October, 1995.
Radecki, P.P. and C.R. Baillod, R&D and Cooperative Program opportunities discussion with David Sonstegard, Staff Vice President, 3M Corporation, Houghton, MI, November, 1995.
Radecki, P.P. and T.N. Rogers, Physical Property Management System collaborative projects opportunities discussion with the M.W. Kellogg Company, Miami Beach, FL, November, 1995.
Radecki, P.P., CenCITT collaborative projects coordination meeting with E.A. Cussler, University of Minnesota, Minneapolis, MN, February, 1996.
Radecki, P.P. and E.A. Cussler, teleconference on status of amphophilic solvents research with S.K. Sikdar, U.S. Environmental Protection Agency, March, 1996.
Radecki, P.P., Overview of CenCITT programs with Prof. Park, POSTEK University (Korea), Houghton, MI, April, 1996.
Radecki, P.P., R&D and Cooperative Program opportunities discussion with Chemical Manufacturers Association Pollution Prevention staff, Washington, DC, April, 1996.
Radecki, P.P., collaborative projects discussion with Technology Transfer Committee, National Pollution Prevention Roundtable meeting, Washington, DC, April, 1996.
Radecki, P.P., presentations on status and results of CenCITT software development and technology research projects with Department of Energy Office of Industrial Technologies, Washington, DC, April, 1996.
Radecki, P.P., exploratory discussion for coordination between Clean Process Advisory System and Use Cluster Scoring System, U.S. Environmental Protection Agency OPPT, April, 1996.
Radecki, P.P., initial scoping meeting for Green Chemistry and Engineering Conference with representatives of EPA, ACS, AIChE, CCR, CMA and Dow Corning, Washington, DC, April, 1996.
Radecki, P.P., R&D and Cooperative Program opportunities discussion with U.S. AEP, Washington, DC, April, 1996.
Radecki, P.P., "Developing Environmental Technology - Cooperatively", E.A. Beaver (Coordinating author) ChemTech, Vol. 26, No. 4, p. 9-15, April, 1996.
Radecki, P.P., J.C. Crittenden, and G. Ondich, presentations on status and results of CenCITT research projects with U.S. Environmental Protection Agency (ORD, OPPT, Pollution Prevention Policy, Deputy Administrator for Science), April, 1996.
Radecki, P.P., CenCITT program overview and research support discussion with Donald Dixon, President of Gauge Products, Houghton, MI, May, 1996.
Radecki, P.P., "Integrating Environmental Considerations into Product and Process Design - Back to the Basics", Proceedings of the University of Purdue 51st Industry Waste Treatment Conference, Purdue, IN, May, 1996.
Radecki, P.P., Invited speaker, "Toward Creation of Sustaining Technologies and Integration of Environmental Considerations into Process and Product Designs", 12th Annual U.S. EPA/Waste Watch Center Conference: Pollution Prevention: Where Next?, National Academy of Sciences Conference Center, Woods Hole, MA, June, 1996.
Radecki, P.P., G. Caneba, J, Williams, J.R. Baker, and J.C. Crittenden, Collaborative project opportunities in waste stream minimization working meeting between CenCITT and 3M Corporation, Houghton, MI, August, 1996.
Radecki, P.P., D.A. Crowl and B.A. Barna, teleconference on collaborative project opportunities in quantitative risk assessment with Robert Hollenback, 3M Corporation, August, 1996.
Radecki, P.P., Invited delegate, U.S.-Egypt Environmentally Conscious Manufacturing Technologies Workshop, Alexandria, Egypt, September, 1996.
Radecki, P.P., R&D and Cooperative Program opportunities discussion with Jay Unwin, National Council for Air and Stream Improvement, Houghton, MI, October, 1996.
Radecki, P.P., "Status Report on Clean Process Advisory System and Separation Technologies Collaborative Projects", Center for Waste Reduction Technologies Meeting and AIChE Meeting, Chicago, IL, November, 1996.
Radecki, P.P., D.A. Crowl and B.A. Barna, working meeting on collaborative project opportunities in quantitative risk assessment with 3M Corporation, Houghton, MI, November 1996.
Radecki, P.P., Cooperative Program opportunities discussion Boeing Corporation, Seattle, WA, December, 1996.
Radecki, P.P., "Overview of CenCITT R&D Program", Battelle Pacific Northwest National Laboratory, Richland, WA, December, 1996.
Radecki, P.P., overview of CenCITT EH&S design decision support software, Boeing Commercial Airplane Group, Seattle, WA, January, 1997.
Radecki, P.P., collaborative proposal development discussion, 3M, Minneapolis, MN, January, 1997.
Radecki, P.P., J.R. Baker, and J.C. Crittenden, collaborative projects opportunities discussion, Air Products and Chemicals, Inc., Houghton, MI, February, 1997.
Radecki, P.P., A.L. Tonkovich, D. Ruthven, and K. Knaebel, "Early Results of CWRT Separation Technologies Roadmapping Project", March, 1997.
Radecki, P.P., J.R. Baker, and J.C. Crittenden, collaborative proposal development discussion, Dow Corning Corporation, Houghton, MI, April, 1997.
Radecki, P.P., participant in Organizing for R&D in the 21st Century conference and American Association for the Advancement of Science Colloquium on Science and Technology Policy, Washington, DC, April, 1997.
Radecki, P.P., session co-chair, "Computer-Based Methods for Design of Clean Products and Processes", Engineering Foundation Conference on Clean Products and Processes, San Diego, CA, May, 1997.
Radecki, P.P., Overview of CenCITT Program, Dow Corning Corporation, Midland, MI, September, 1997.
Radecki, P.P., "CenCITT Activities Update", Center for Waste Reduction Technologies Summer Meeting, Denver, CO, July, 1998.
Rogers, T.N., "Physical Property Prediction for CPAS", AIChE-CWRT CPAS Meeting, Houston, TX, February, 1994.
Rudd, D.F., Symposium on Catalytic Reaction Engineering for Environmentally Benign Processes, ACS, San Diego, CA, April, 1994.
Salman, Salman R., Professor, Chemistry Department, Yarmouk University Irbid, Jordan, Fulbright Fellow Visiting Researcher Sponsorship, Michigan Technological University, Summer 1996.
Sandell, J.F., L. Sutter, J. Willemin, and K. Ragland, Materials Processing Pollution Prevention Group concept paper and Collaborative research meeting, and Olmsted County Public Works, November, 1993.
Shonnard, D.R., panelist and roadmapping group member, National Workshop on Process Waste Reduction via Separation Technologies and Separative Reactors, New Orleans, LA, February, 1998.
Srinivasan, H., C.C. Chu, and R. Gadh, "Virtual Reality for Design and Manufacturing", Appliance Manufacturer Magazine, pp. 23-25, May, 1999.
Srinivasan, H., J. Mo, R. Figueroa, and R. Gadh, "Virtual Analysis, I-CARVE’s A3D Aid CAD Projects", Silicon Graphics World Magazine, pp. 13-14, June, 1999.
Sutherland, J.W., J.R. Baker, and P.P. Radecki, Environmentally Conscious Manufacturing at the National Center for Clean Industrial and Treatment Technologies, Michigan Technological University Manufacturing Initiative Blue Ribbon Committee Meeting, Houghton, MI, August, 1998.
Suri, R.P.S., Michigan Water Environment Association Annual Conference, Harbor Springs, MI, June, 1993.
Tieder, R.E., Iron and Steel Industry Pollution Prevention Conference, Chicago, IL, October, 1992.
Tieder, R.E., Project Discussions and Negotiations: Foundry Association of Michigan, Environmental Services Division, Dow Corning, Western Michigan University, Technical Services Association, December, 1992.
Tieder, R.E., US Cast Metals Advisory Board, June, 1994.
Tieder, R.E., J.C. Quigley, Radecki, P.P., J.R. Baker, and J.C. Crittenden, "R&D and Cooperative Program Opportunities Discussion with Wisconsin Solid and Hazardous Waste Education Center (SHWEC)", Houghton, MI, October, 1995.
Ulmer, Marcus, Ph.D. Student, University of Karlsruhe, Karlsruhe, Germany, Chemistry Engineering Department, Visiting Scholar, Michigan Technological University, January, 1997.